As far a si know MED9.1 isn't on the list of Carprog opel ECUs
As far a si know MED9.1 isn't on the list of Carprog opel ECUs
Someone got this error while programming
- Start of preparing flash programming
- ERROR: Write memory error @ address 0x00200000, word access: Core error.
- ERROR: Failed to read back RAMCode for verification.
- ERROR: Failed to prepare for programming.
Failed to download RAMCode!
mikroel (5th September, 2018)
I have original carprog and today ive tried doing a 2018 land cruiser airbag module 89170-60E60, i read it obd and i get the message OBD2 Adapter not supported , so i remove the module and wire it directly into module socket using A1 multi and other lead , when i try this i have no success reading , has anybody got any help for me on this problem ??
ovidiumarin (12th October, 2018)
any idea what i have done wrong
i have managed to modify a10 cable and i have now read the data from the module , when i try to re write the new data i get the message MCU no reply , any ideas on my next step ?
Screenshot_20180918-195313.jpg
Hello everyone. I have a carprog with the version 10.05 sn 081105CAR001773I here. i have many functions with n / a. Can I unlock this? if so what do I need for that. i am a freshman and ask for help
Thank you
juozas10 (21st September, 2018)
Hello Friends!
I have CarProg 8.21/10.05. Can I use with 4.01? I did not get it on CD 4.01. Why better than 10.05?
Thanks!
BR
Hello all,
I recently bought a Carprog Version 10.93... Having seen that we have no mention of it here I'm beginning to wonder if I bought a lemon as I am having issues reading a Delphi MT35e ECU. I keep getting errors such as, Could not receive CAN kwp frame, Could not send CAN kwp frame and Could not receive device buffer.
So far I have replaced a 100n capacitor at location R1 in the A1 adapter with a 103 resistor. I have no wire from pin 16 to the leg of the MOSFET, Is this essential? I have ordered a new MCP2515 and the 22uf capacitors and will replace upon arrival. I have also ordered a JTAG programmer and will flash the carprog if required. Does any one have a stable firmware and software they use?
Has any one else got a 10.93 and have any known fixes for them?
Last edited by theislandhub; 2nd October, 2018 at 05:03 PM.
Hi, Iīm new on carprog. I recently bought a clon carprog and sometimes works but sometimes it doesnīt for airbag. What do you recommend me so I can have the best use of it? Also, if someone can share a manual or let me know how I can connect it to an airbag module by OBDII itīd be very helpful for me.
I really appreciate all the help you can share with me.
Thank you.
Bookmarks