Just try it with Lonsdor
(How shall I help you, if you don't give the basic infos to me??? Where are the pins what you try, and why are you changing 'em?)
Were's the dump?
I am trying to add a spare proximity key to USA specs 2008 Mitsubishi Lancer Evo 10 and it is not working.
I think I am failing on the pincode, I have tried 8A02, 8A12, 8A22, 8A32, 8A42, 8A52, 8A62 And 1530 with no success.
i am trying with Obdstar pad2.
I attached a photo of the remote.
Anyone can help with the pincode?
Just try it with Lonsdor
(How shall I help you, if you don't give the basic infos to me??? Where are the pins what you try, and why are you changing 'em?)
Were's the dump?
Last edited by PocketHero; 11th April, 2018 at 07:57 PM.
Unfortunately I dont have Londsor.
What Info I missed Giving? I tried all the pins that I cited in the earlier post. I am not changing them...I am just trying based on info i found on the web.
I am doing this car by obd, i didnt pull the dump yet
Thanks
I think nobody can help without dump...
I will try to pull the dump and post again.
How did you solve it? I tried today outlander EU 2010 keyless with knob.
tried pin: 8A02, 8A12, 8A22, 8A32, 8A42, 8A62, 7129
with londsor, obdstar dp, fvdi
all tools failed. what is the reason?
in the middle of the vin is code CW8W while fvdi help shows pin 8A42 for CW0W
I done same car in the past and all ok (pin 8A42)
Maybe the keys number is too high, you have to delete áll keys, and you can teach the existing keys. Just an idea...
Tapatalkkal küldve az én S55 eszközömről
There is no option to erase keys. Anyway I will not do it with tools above.
3 wrong attempt to pin code ecu will be lock.
And what happen when ecu lock? I tried 10 times. Car start. FVDI informs need to leave ignition for 15 min to unlock.
I did it with skp, no pin code needed.
Did another outlander 2014 with skp also no pin code asked.
Sent from my Pixel using Tapatalk
HeXeN (21st September, 2018)
This is because the tool sends a default PIN code to a specific modell.
Sorry, there are two methods: 1st what you wrote, the default pin. 2nd is that the tool can skip the pin process, or parts of security processes.
For Example Insignia AKL. The usual Way is to delete all existing keys, and add 2 New ones with 10 mins security waiting, with alarm/Horn on. Some tools can skip that, and do the programing without alarm and waiting.
Bookmarks