whate you neen
conection pins to programmer ,you want to building adapter flash 1+flash 4
whate you neen
conection pins to programmer ,you want to building adapter flash 1+flash 4
Last edited by karrom; 5th April, 2013 at 10:07 PM.
prusony (7th April, 2013)
building adapter flash 1+flash 4 - Yes, i want to building it...
her you go flash 1 + flash 4 ... 56pin
Sorry, are the full adapter name DIL48/TSOP56 ZIF 18.4mm Flash-1 (x16) and DIL48/TSOP56 ZIF 18.4mm Flash-4 (x16)?
Last edited by Zmann; 7th April, 2013 at 02:58 AM.
yes...full adapter name DIL48/TSOP56 ZIF 18.4mm Flash-1 and DIL48/TSOP56 ZIF 18.4mm Flash-4
Last edited by karrom; 7th April, 2013 at 05:12 AM.
2 karrom - BIG thank you!
I need circuit for adapter DIL48/SSOP56 ZIF Flash-1.
Hello
I am looking circuite adapter 908LJ24 QFP80 to dil for Elnec programmer
Thanks in advance
Thank you for the schematics. How about flash4 (x16) and flash 1(x16)? I ve tried to decode a carradio delphi rcd 510. I make several with flash 4 with no problem, but today I found one with s29gl128s instead of S29 gl128N. I try to read it like the n one but i have an error for the pin 35. i try to ignore that error and I read it. I nottice that all bytes is repeating twice. I looked on your schematics and datasheets and realise that the s one did not support 8 bits organisation, so I need a way to read it on 16 bits.
Thank you
I need circuit for adapter DIL48/SSOP56 ZIF Flash-2
Hi.
I'm looking for circuit adapters for BeeProg2 programmer
DIL48/PQFP80 ZIF M58BW-1 (Ord. no. 70-0225)
https://www.elnec.com/en/products/pr...0_ZIF_M58BW-1/
DIL48/SSOP56 ZIF Flash-2 (Ord. no. 70-0099)
https://www.elnec.com/en/products/pr...6_ZIF_Flash-2/
Thanks for any answer.
Andrey.
Hello, I have exactly the same problem to read S29gl128s decode a carradio delphi Skoda Bolero.
Did you read correctly flash ?
Bookmarks