>>>>>>>>SMOK SUPPORT THREAD<<<<<<<

**honingkoning** · 19th August, 2018, 03:29 PM

Originally Posted by baze007

Someone had a problem with edc17c46 Skoda Super B .......?Smok cant transfer Immo data property......car starts one time....after second tray car wont start and have DTC
-P0610 - engine control unit incorrectly coded
-P160A - check sum error
-P1570 - engine start blocked by immobilizer
-U140A - Terminal 30 - open circuit

Why Dont tou make adaption?
It worked for me a couple times always good.

Wbr

**amigokola** · 19th August, 2018, 06:29 PM

Learn key in UHDS - Immo Crafter EZS works ??
Tried with VCDS with no success...

**shotaaa** · 20th August, 2018, 01:20 AM

Citroen c3 2018 somdebody tried this year ?

Regards.

**gijsvm** · 20th August, 2018, 07:53 AM

Originally Posted by shotaaa

Citroen c3 2018 somdebody tried this year ?

Regards.

Bsi by obd works
Dash work by jtag too

**Nicolas9** · 21st August, 2018, 12:23 PM

Can smok do Cla 2017(facelift) by obd? (All versions, or some)?

**gijsvm** · 22nd August, 2018, 09:13 AM

Originally Posted by Nicolas9

Can smok do Cla 2017(facelift) by obd? (All versions, or some)?

Only first years will work by obd, 2017 not work

**iamfooser** · 23rd August, 2018, 02:14 PM

Anyone tested Abarth? Cluster looks like Fiat500 TFT. Would like to purchase the license but no response from Mr smok on compatibility.

Sent from my ANE-LX2 using Tapatalk

**ATRON** · 30th August, 2018, 10:11 AM

Clio 4 ESP ,You instal Database RT0022 should be installed from the Manual bookmark.

**ATRON** · 30th August, 2018, 10:13 AM

what does this mean?

**iso** · 4th September, 2018, 12:22 PM

Hi, if anyone have cable schematic DB15 to OBD2 for SMOK UHDS please send it to me.
Thanks in advance.

**sjc1** · 5th September, 2018, 08:15 PM

can smok read opel ecus via obd or is direct connection required?

**Ocin** · 6th September, 2018, 08:28 AM

you find a solution ?

Originally Posted by diga1

Hello
other day i had to do milage on master 2018
did cluster vith smok ok but engine ecu sid310
it didnt do it reseted some lines but total milage
in engine ecu it didnt cange. Is there any trick or
just read write process?

**shotaaa** · 6th September, 2018, 05:44 PM

Hello friends, how is SMOK UHDS on johson controls cluster ( dashboard Polo/Fabia Jonson NEC+95320)? because i have now a couple of tools they can change km but after dash goes sleeps, the km springs back....
i have many vw polo 6r 2011 2012 2013 (JC). But every time i change the km it springs back, so i think my tools are not good on this type of cluster.
So i was curious if SMOK can do it ?

**drpeter** · 6th September, 2018, 06:02 PM

Originally Posted by shotaaa

Hello friends, how is SMOK UHDS on johson controls cluster ( dashboard Polo/Fabia Jonson NEC+95320)? because i have now a couple of tools they can change km but after dash goes sleeps, the km springs back....
i have many vw polo 6r 2011 2012 2013 (JC). But every time i change the km it springs back, so i think my tools are not good on this type of cluster.
So i was curious if SMOK can do it ?

I had the same dash once year 2013, it jumped back with all my tools, i asked smok he said sent the dash to me. So i think he also don't have a solution for that version, or maybe he have now (it was 1 year ago).

**shotaaa** · 6th September, 2018, 11:17 PM

Originally Posted by drpeter

I had the same dash once year 2013, it jumped back with all my tools, i asked smok he said sent the dash to me. So i think he also don't have a solution for that version, or maybe he have now (it was 1 year ago).

And how about year 2012 or older models did you tried with smok ?