There has to better tool like upa vvdi Carprog or something to read write via solder points or another approach
Any one have a good dump for a 2016 accord 4 door auto US model?
was doing one and now dump is corrupt and mileage and trip blank cluster still works gauges etc seems better to take Cluster apart n remove c76 keep getting fail to verify data won't save complete dump a few bytes here and there change each time you read or write using USA prog voltage set at 3.1 to 3.5 Accord 2013 C76 option
Had a issue Had a issue with my uploads so if you see one of my posts and need that dump let me know and I'll post it!
There has to better tool like upa vvdi Carprog or something to read write via solder points or another approach
Had a issue Had a issue with my uploads so if you see one of my posts and need that dump let me know and I'll post it!
I've done it with jprog no problem . Haven't try with USA prog yet
sagie (1st August, 2018)
Had a issue Had a issue with my uploads so if you see one of my posts and need that dump let me know and I'll post it!
many different builds on that dash? writing u may have more or may have less..... but either way wont be correct
Reading is fundamental, asking is easy............................
sagie (1st August, 2018)
Clusters had a dump posted on here 4K anyway keep in mind my car was a 2016 EX Sedan Auto btw took the cluster completely apart and desoldered tssop was then able to read and write at will. I'm convinced smelecom is not the tool for this cluster via solder points!
Had a issue Had a issue with my uploads so if you see one of my posts and need that dump let me know and I'll post it!
Gonna give the next one a try with kynar wire and smelecom but gonna read and save dump with VVDI and Carprog first.
Had a issue Had a issue with my uploads so if you see one of my posts and need that dump let me know and I'll post it!
ive done many a time with smele , so far ive done 22 accords maybe more no issues
Reading is fundamental, asking is easy............................
have fun with the needles
Reading is fundamental, asking is easy............................
MileageAudit5 (1st April, 2021)
Had a issue Had a issue with my uploads so if you see one of my posts and need that dump let me know and I'll post it!
ascrap2003 (30th September, 2017)
all ready taken care of but would love any 2013+ accord dumps you may have to save in case of future issues.
Had a issue Had a issue with my uploads so if you see one of my posts and need that dump let me know and I'll post it!
ascrap2003 (30th September, 2017), cklair (2nd October, 2017), sagie (1st August, 2018)
? Sounds like someone is calling me out, i think the proccess can only maybe work for sure with kynar wire, inserted into those lil crummy contact points then while held into and not on those points solder adapter wires to kynar wires, then read and save dump mutiple times and compare dumps if they all match then edit & write. But i still see guys on here that have way more experience than me having issues and even saying jprog or other programmers better choice for this specific dash.
Had a issue Had a issue with my uploads so if you see one of my posts and need that dump let me know and I'll post it!
Bookmarks