doctore (1st January, 2018)
doctore (1st January, 2018)
BDM is not supported in HW4 yet
thanks you. i see you can connect with ZGW but can you read Cas like this and get data for all keys lost?
CAS4 you will always need DUMP. FEM/BDC you can get and modify data without DUMP
AutoHex II BMW Diagnostic Software Version 1.0.48
Mileage reset and options for FEM and BDC
Autohex II BMW Diagnostic software update is available for Autohex BMW users.
- Added following models for coding and programming: F23, F88, F90, F97, F98, G01, G02, G08, G11, G12, G13, G30, G31, G32, G38.
- Mileage reset for FEM and BDC is available from Unlocking Function (see picture).
- ISN can be written in FEM and BDC (from ISN manager)
- Added new diagrams in ISN boot mode to help HW4 users in making the connections.
Hello,
Connection points still in error
MEVD1725 Connection socket 1 pin +
Autohex mevd1725 connection socket 1 pin gnd ?
CAN H-CAN L YELLOW-ORANGE 120 OHM ? AUTOHEE.jpg
i need to replace MEV1722
cant find this dme on autohex website
just wonder if autohexII capable of doing that
when I buy this option AHX0001
I not understand wich drogs use this autohex company! 5850usd for full soft!?
it is real this price?
what do you mean by that
MEV1722 is supported
koziolek (8th February, 2018)
@maxmin
You can buy the standard vesrion AHX0001 it is cheaper than full version.
koziolek (8th February, 2018)
Hi there
Can Autohex be used to flash CAS units?
Example I get a used CAS3 or CAS4 CAS but the part number doens't match the original. Will Autohex be able to write the correct flash and eeprom if the MCU maskset is the same? Eg CAS4 is 5m48H.
Hi, anyone no good place for FEM remote keys other than 3d group?
Autohex was able to read an ISN from a MEVD1728 ECU from an F10 for me.
It can also modify the working hours if need be.
Every other tool I had failed me, big up to the developer.
Last edited by Fallen; 24th February, 2018 at 01:31 AM.
PremierD (24th February, 2018)
Bookmarks