Immo 5. Doesnt have pin code if i remember right
IMMO Version 5
TPROT_V02.05.0116 TC1767
CS: 8C5F917FD07FF083811CA0870792A82C
hello is it possible to find Pin code from ecu by file?
old ecu is dead and i got new i tryed to make immo off but still got safe in dash.
ecu is edc17cp46
audi q5 mciro original.rar
Immo 5. Doesnt have pin code if i remember right
IMMO Version 5
TPROT_V02.05.0116 TC1767
CS: 8C5F917FD07FF083811CA0870792A82C
Immo 5+
Pin 01927
Porshe & VAG EDC17/ MED17 clone, adaptation, immooff, change Power Class. BCM2 clone, ELV synchonisation, adaptation.
Powerclass : 6A
Porshe & VAG EDC17/ MED17 clone, adaptation, immooff, change Power Class. BCM2 clone, ELV synchonisation, adaptation.
Here are the most accurate and correct data)
On this ECU immo off not possible , Only possible data transfer form original ECU or BCM2.
Also there is no way to program it with Pin. Pi was used in Immo 3 and some early Immo 4 , late Immo 4 and Immo 5 not going to happen.
I can do immoff for Immo 5 without dash error.
Porshe & VAG EDC17/ MED17 clone, adaptation, immooff, change Power Class. BCM2 clone, ELV synchonisation, adaptation.
doctore (27th May, 2017)
[Quote = yugo45; 3.040.069] In questa immo ECU off non possibile, solo possibile forma di trasferimento dati centralina originale o BCM2.
Inoltre non v'? alcun modo di programmarlo con il Pin. Pi ? stato utilizzato in Immo 3 e un po 'presto Immo 4, in ritardo Immo 4 e 5 Immo non accadr?. [/ QUOTE]
I can do it without safe in dash
bcm2 elv adapt online offline -echange immodata -clone immodata sinchro bcm elv medc17 edc17 Crafter EZS e EDC17 sinchro -DPF/ EGR/ DTC/ removal/: IMMO ADAPT edc16 EDC17 edc17c64 C74 NOW WORKING MED17/MEV17/ VAG ecu clone full working all
PCR2.1 FULL CLONE ou adapt, clone all edc17 me17 , etc / dash echange immodata repair immodata add key etc etc
doctore (27th May, 2017)
wokcz (31st May, 2017)
UDS protocol ECU is not possible to do Immo off,
And all Immo 5 ECU has UDS protocol. You can do it in flash and delete code to not display in cluster , but car will start 3-5 times and will not work after that .
There was few posts about that , where people did it in flash and after 3-45 times start car , it will corrupt eeprom and car not start after that.
Only data transfer is 100% correct solution.
so know when i have pin cs and mac?
its not possible to code it with odis og vag?
Bookmarks