software in attachment
B Regards
software in attachment
B Regards
gelencserg (18th July, 2021), Meat-Head (5th September, 2015), paolo poppi (12th September, 2018), yellowstilo (26th June, 2015)
Hello
I need iaw59 decoder drill layer please help
hello
i try program 16f876A for 2 day but fail how can i do
program pickit 3
program said
2015-09-05T00:50:32+0700- Completed loading IPE.
************************************************** ***
Connecting to MPLAB PICkit 3...
Currently loaded firmware on PICkit 3
Firmware Suite Version.....01.37.15
Firmware type..............Midrange
Target voltage detected
Target device PIC16F876A found.
Device ID Revision = 6
2015-09-05T00:51:22+0700- Loading hex file. Please wait...
Loading code from C:\Documents and Settings\lek\My Documents\Downloads\59F decoder tool open project\59f DECODER tool full project\IAW59F Decoding tool by otocheck\BIN\16F876A.hex...
Warning: C:\Documents and Settings\lek\My Documents\Downloads\59F decoder tool open project\59f DECODER tool full project\IAW59F Decoding tool by otocheck\BIN\16F876A.hex contains code that is located at addresses that do not exist on the PIC16F876A.
2015-09-05T00:51:23+0700- Hex file loaded successfully.
2015-09-05T00:51:24+0700- Programming...
The following memory area(s) will be programmed:
program memory: start address = 0x0, end address = 0x3e7
configuration memory
Device Erased...
Programming...
Programming/Verify complete
2015-09-05T00:51:29+0700- Programming complete
Pass Count: 25
2015-09-05T00:51:33+0700- Verifying...
Verifying...
program memory
Address: 0 Expected Value: 2864 Received Value: 0
Verify failed
2015-09-05T00:51:37+0700- Verify failed
2015-09-05T00:51:44+0700- Verifying...
Verifying...
program memory
Address: 0 Expected Value: 2864 Received Value: 0
Verify failed
2015-09-05T00:51:47+0700- Verify failed
2015-09-05T00:52:15+0700- Programming...
The following memory area(s) will be programmed:
program memory: start address = 0x0, end address = 0x3e7
configuration memory
Device Erased...
Programming...
program memory
Address: 0 Expected Value: 2864 Received Value: 0
Failed to program device
2015-09-05T00:52:29+0700- Programming failed
Pass Count: 25
2015-09-05T00:52:47+0700- Loading hex file. Please wait...
Loading code from C:\Documents and Settings\lek\My Documents\Downloads\59F decoder tool open project\59f DECODER tool full project\IAW59F Decoding tool by otocheck\BIN\16F876A.hex...
Warning: C:\Documents and Settings\lek\My Documents\Downloads\59F decoder tool open project\59f DECODER tool full project\IAW59F Decoding tool by otocheck\BIN\16F876A.hex contains code that is located at addresses that do not exist on the PIC16F876A.
2015-09-05T00:52:47+0700- Hex file loaded successfully.
2015-09-05T00:52:49+0700- Programming...
The following memory area(s) will be programmed:
program memory: start address = 0x0, end address = 0x3e7
configuration memory
Device Erased...
Programming...
program memory
Address: 0 Expected Value: 2864 Received Value: 0
Failed to program device
2015-09-05T00:53:02+0700- Programming failed
Pass Count: 25
2015-09-05T00:56:37+0700- Loading hex file. Please wait...
Loading code from C:\Documents and Settings\lek\My Documents\Downloads\zip file\59F decoder tool open project\59f DECODER tool full project\IAW59F Decoding tool by otocheck\BIN\PIC16F876A.hex...
2015-09-05T00:56:37+0700- Hex file loaded successfully.
2015-09-05T00:56:39+0700- Programming...
Device Erased...
Programming...
MPLAB's memory is blank so no programming operation was attempted.
2015-09-05T00:56:52+0700- Programming complete
Pass Count: 26
2015-09-05T00:57:02+0700- Verifying...
Verifying...
program memory
Address: 0 Expected Value: 3fff Received Value: 0
Verify failed
2015-09-05T00:57:06+0700- Verify failed
2015-09-05T00:57:17+0700- Loading hex file. Please wait...
Loading code from C:\Documents and Settings\lek\My Documents\Downloads\zip file\59F decoder tool open project\59f DECODER tool full project\IAW59F Decoding tool by otocheck\BIN\16F876A.hex...
Warning: C:\Documents and Settings\lek\My Documents\Downloads\zip file\59F decoder tool open project\59f DECODER tool full project\IAW59F Decoding tool by otocheck\BIN\16F876A.hex contains code that is located at addresses that do not exist on the PIC16F876A.
2015-09-05T00:57:18+0700- Hex file loaded successfully.
2015-09-05T00:57:18+0700- Programming...
The following memory area(s) will be programmed:
program memory: start address = 0x0, end address = 0x3e7
configuration memory
Device Erased...
Programming...
program memory
Address: 0 Expected Value: 2864 Received Value: 0
Failed to program device
2015-09-05T00:57:32+0700- Programming failed
Pass Count: 26
Target removed
2015-09-05T01:00:47+0700- Programming...
The following memory area(s) will be programmed:
program memory: start address = 0x0, end address = 0x3e7
configuration memory
Device Erased...
Programming...
program memory
Address: 0 Expected Value: 2864 Received Value: 0
Failed to program device
2015-09-05T01:01:03+0700- Programming failed
Pass Count: 26
Target removed
2015-09-05T01:01:18+0700- Programming...
The following memory area(s) will be programmed:
program memory: start address = 0x0, end address = 0x3e7
configuration memory
Device Erased...
Programming...
program memory
Address: 0 Expected Value: 2864 Received Value: 0
Failed to program device
2015-09-05T01:01:34+0700- Programming failed
Pass Count: 26
Target removed
Target voltage detected
Target device PIC16F876A found.
Device ID Revision = 6
2015-09-05T01:02:22+0700- Loading hex file. Please wait...
Loading code from C:\Documents and Settings\lek\My Documents\Downloads\zip file\59F decoder tool open project\59f DECODER tool full project\IAW59F Decoding tool by otocheck\BIN\16F876A.hex...
Warning: C:\Documents and Settings\lek\My Documents\Downloads\zip file\59F decoder tool open project\59f DECODER tool full project\IAW59F Decoding tool by otocheck\BIN\16F876A.hex contains code that is located at addresses that do not exist on the PIC16F876A.
2015-09-05T01:02:23+0700- Hex file loaded successfully.
2015-09-05T01:02:53+0700- Programming...
2015-09-05T01:02:53+0700- Programming failed
Pass Count: 26
thanks regards
you need the PIC 16F876 version without the A.....
Meat-Head (5th September, 2015)
PIC with A is working too,for now i program two PIC-s with A on the end.The problem with PIC-KIT is that verifay is in the end ,but befor is code lock from HEX file.Therefor after programing fuse bits PIC do not answer read command corectly.But i do not know what are correct fuse bits for device with ""A"".When do programing of A device SW is conecting with HW and relays are kliking -on /off ,LED is on then off,but i coan not connect to IAW 59
I spent a lot of time around creating a new project .It is necessary to aid where the errors in the project.HELP.HELP.
Here is sample of decoding( Virgine to Immo off )IAW5AF HW303
https://youtu.be/MpeioteCYks
Sent from my iPhone using Tapatalk
Hello,
I read the 15 page of the subject , but i don't see the schema en the hex files
where can i find it ?
thanks :-)
eric paris (16th May, 2017)
http://www.eobdtool.co.uk/upload/pro...n-car-list.pdf
piasini 4.3 uygun fiyat ve bir çok araba model
can you read EEprom from 59F.M3 HW303 with Piasini?
Bookmarks