>>>>>>>>SMOK SUPPORT THREAD<<<<<<<

**twincam** · 16th April, 2018, 08:47 AM

Just Read info if the is no connection change option to another type

**ghostrider72** · 16th April, 2018, 09:03 AM

Cool. Thank you guys

**Mak88** · 16th April, 2018, 09:29 AM

Hello this is from Mercedes W209 i can not read it if takenout the eis can it make by the prommer ? Yhanks advance Mercedes W209 2003 diesel

Sent from my Lenovo K53a48 using Tapatalk

**raptor911** · 16th April, 2018, 12:09 PM

20180416_131209.jpghello every body today i tray bsi JC and valeo on bench to read flash .but not working,it say
BSI Siemens,Valeo,JC, JC2015Battery status unknown....
Licence Accepted
BSI Siemens,Valeo,JC, JC2015
No Comunication
Read Error !!!
pinout are ok verified multipled time but still no reading ;
any solutions?

**igorr** · 16th April, 2018, 02:36 PM

skoda octavia
dash nec+24c32
ecu pcr 2.1
tray to change ecu
read immo data from dash
preaper ecu read all info
obd change data input data from ecu
input new immo data
change immo da all ok
last step immo 4 uds
when tray login
pin refused time lock 2E 37
did someone have this situation

**gijsvm** · 16th April, 2018, 03:08 PM

Originally Posted by Mak88

Hello this is from Mercedes W209 i can not read it if takenout the eis can it make by the prommer ? Yhanks advance Mercedes W209 2003 diesel

Sent from my Lenovo K53a48 using Tapatalk

If it give "init error" there is no communication with dash at all. same as not plug in obd connector.

**Mak88** · 16th April, 2018, 04:11 PM

Okey f i take out the ezs amd read it whit jtag progamer is it gonna be okey or not? Is it good jtag for this one ?

Sent from my Lenovo K53a48 using Tapatalk

**al0503** · 16th April, 2018, 10:49 PM

Originally Posted by Mak88

Okey f i take out the ezs amd read it whit jtag progamer is it gonna be okey or not? Is it good jtag for this one ?

Sent from my Lenovo K53a48 using Tapatalk

Jtag works very good with all the ezs that are listed in the help button

Enviado desde mi iPhone utilizando Tapatalk

**Mak88** · 17th April, 2018, 11:54 AM

Hello i.m trying to read Mc68Hc912D 128 but there is no comunicate with theMcu do you know what can be the reason

Sent from my Lenovo K53a48 using Tapatalk

**gijsvm** · 17th April, 2018, 01:16 PM

Originally Posted by Mak88

Hello i.m trying to read Mc68Hc912D 128 but there is no comunicate with theMcu do you know what can be the reason

Sent from my Lenovo K53a48 using Tapatalk

Yes i know, and if you look better on the picture you know too.....

**Mak88** · 17th April, 2018, 01:27 PM

Yes i findmistake thansk

Sent from my Lenovo K53a48 using Tapatalk

**Mak88** · 17th April, 2018, 03:44 PM

After change the km now dont whant to start the car do you have any idea what it can be the dash made with digiprog jtag ezs now nothing show atol

Sent from my Lenovo K53a48 using Tapatalk

**solitaire** · 17th April, 2018, 04:38 PM

Originally Posted by raptor911

20180416_131209.jpghello every body today i tray bsi JC and valeo on bench to read flash .but not working,it say
BSI Siemens,Valeo,JC, JC2015Battery status unknown....
Licence Accepted
BSI Siemens,Valeo,JC, JC2015
No Comunication
Read Error !!!
pinout are ok verified multipled time but still no reading ;
any solutions?

show pinout from smok obd cable to bsi
i think your conection is wrong

**honingkoning** · 18th April, 2018, 03:04 PM

Originally Posted by solitaire

show pinout from smok obd cable to bsi
i think your conection is wrong

Try with connections from Website of i/o terminal.

It should at least show id.

Wbr Adam.

**Mak88** · 19th April, 2018, 04:30 PM

Hello how are you tomorow will came Volvo Xc60 2012 for mileage calibration how i need to do for good job can you little help me becousei.m new with smog thanks alot

Sent from my Lenovo K53a48 using Tapatalk