copy eeprom and flash from old ecu. should be work
HI!! dear members.
i have a citroen xsara picasso 2.0 HDI RHY with a faulty ECU (edc15c2) ok, internal chip b342fsc is dead. so i buy another edc15c2 from internet... connect the new ecu and car start without comunication with BSI (again, damn) car still in eco mode with the engine running fine. so, i take my galleto and read 24f400 without problem, when i look the reference number i discover that ecu is not from a citroen instead a SUZUKI... suzuki grand vitara 2.0 hdi. i write with the original dump from old ecu and ecu now its comunicating with BSI, but engine won't start ... i download another dump with the same S/N and car won't start. i disassemble the new ecu and i see a lot of new components non pressents in the old ecu. my question is: can i use this ecu??
OLD ECU S/N: 0 281 011 521
NEW ECU S/N: 0 281 011 675
i can move the car but bsi stay in eco mode without radio air etc.
thanks in advance
copy eeprom and flash from old ecu. should be work
Patrick190e (20th April, 2018)
...your org ecu is a edc15-11.1 , your ecu from the yunkyard is a edc15c2-10.1 - you must get same family type ecu
Working with : Bosch FLA Dyno , KTS 650, WINOLS , CMD Master, Byteshooter Master, SPI, Powergate,CADOPRO, selfmade tools
Patrick190e (20th April, 2018)
@Vasily.Ucan you help me???
...like i said , get a ecu with the same number or at least the same family , otherwise you will have problems
Working with : Bosch FLA Dyno , KTS 650, WINOLS , CMD Master, Byteshooter Master, SPI, Powergate,CADOPRO, selfmade tools
Bookmarks