What tool you used. Procedure fem program was succeefull?
as you add key only when fem is already programmed. In this way imposible to brick the car
My first F series. F020. Have working key. Follow the guide but something was wrong and at the end, couldn't program new remote. Big problem, now car don't start. Any suggestion? Should i rewrite Fem eeprom with original file?
Enviado do meu MI 6 através do Tapatalk
Tools: AVDI, Im608, VVDI 2, VVDI MB, T-Code, SBB
Eeprom: VVDI Prog, Orange, Tango, TMPro, R270, ABPROG
Other: VVDI Mini Key Tool, Key Tool, KD-X2
Electronic key machine: Silca Triax, Idea, Unocode
What tool you used. Procedure fem program was succeefull?
as you add key only when fem is already programmed. In this way imposible to brick the car
Renault ECU tool / IO terminal / A.S.W
Tools: AVDI, Im608, VVDI 2, VVDI MB, T-Code, SBB
Eeprom: VVDI Prog, Orange, Tango, TMPro, R270, ABPROG
Other: VVDI Mini Key Tool, Key Tool, KD-X2
Electronic key machine: Silca Triax, Idea, Unocode
Than contact avdi support.
I dont know how avdi but other tools if key not adeed you wont brick fem. Original eeprom you already wrote in last step before add key .
Renault ECU tool / IO terminal / A.S.W
lmqcatarino (23rd April, 2018)
Tools: AVDI, Im608, VVDI 2, VVDI MB, T-Code, SBB
Eeprom: VVDI Prog, Orange, Tango, TMPro, R270, ABPROG
Other: VVDI Mini Key Tool, Key Tool, KD-X2
Electronic key machine: Silca Triax, Idea, Unocode
I this not many use avdi for fem here . Maybe nobody.
What support sais?
Renault ECU tool / IO terminal / A.S.W
lmqcatarino (24th April, 2018)
Problem solved with help from abrites Spanish dealer.
Enviado do meu MI 6 através do Tapatalk
Tools: AVDI, Im608, VVDI 2, VVDI MB, T-Code, SBB
Eeprom: VVDI Prog, Orange, Tango, TMPro, R270, ABPROG
Other: VVDI Mini Key Tool, Key Tool, KD-X2
Electronic key machine: Silca Triax, Idea, Unocode
drugowaz (24th April, 2018)
So share solution.
Renault ECU tool / IO terminal / A.S.W
bersch8688 (5th May, 2018)
I know that. But it wasn't easy, and i didn't get very well what was the solution. It was remotely. I could see they rewrite ECU from backup files from Avdi twice. But that didn't solve the problem. Just after that they did something that I couldn't get it.
Enviado do meu MI 6 através do Tapatalk
Tools: AVDI, Im608, VVDI 2, VVDI MB, T-Code, SBB
Eeprom: VVDI Prog, Orange, Tango, TMPro, R270, ABPROG
Other: VVDI Mini Key Tool, Key Tool, KD-X2
Electronic key machine: Silca Triax, Idea, Unocode
p1et (24th April, 2018)
I'm guessing it did not restore the FEM coding correctly.
AVDI saves this before it does the downgrade.
Ok. The problem was the new remote wasn't the correct. I go with right remote 868mhz, clean DTC's and both remotes work's. Job done.
Enviado do meu MI 6 através do Tapatalk
Tools: AVDI, Im608, VVDI 2, VVDI MB, T-Code, SBB
Eeprom: VVDI Prog, Orange, Tango, TMPro, R270, ABPROG
Other: VVDI Mini Key Tool, Key Tool, KD-X2
Electronic key machine: Silca Triax, Idea, Unocode
I add new key, first put customer remote on Protag after por new remote and then approach new remote to the key sign on car, but Avdi says "invalid remote type".
I cancel the procedure, and after that, the original remote didn't start the car because several DTC's that couldn't be erased.
Go back and program remote with correct frequency and now finish the procedure, erase DTC's and both remotes work.
Enviado do meu MI 6 através do Tapatalk
Tools: AVDI, Im608, VVDI 2, VVDI MB, T-Code, SBB
Eeprom: VVDI Prog, Orange, Tango, TMPro, R270, ABPROG
Other: VVDI Mini Key Tool, Key Tool, KD-X2
Electronic key machine: Silca Triax, Idea, Unocode
p1et (4th May, 2018)
Bookmarks