>>>>>>>>>>>>>>CONDOR KEYCUTTERS <<<<<<<<<<<<<

[sleepyrz]

Hi,
I just get a brand new condor XC mini and updated to 5.0.4
I got a problem with GT15 Piaggio keys, the key is too small to reach the shoulder stop of the m1 jaw.. see pictures.
So no way to cut the key directly.
I was able to cut those keys with my chinese miracle A7 ...
Any ideas to solve this issue?
OlivierAttachment 524106Attachment 524107

yes same way i did it

cut off head of key

stick in blade and cut

duplicate key onto another one with head

[gokart]

I've not cut GT15 with the latest update yet. Has it still cut the tip of the key?

[bid178678]

yes same way i did it

cut off head of key

stick in blade and cut

duplicate key onto another one with head

Hi,
Yes this is a solution but i buy XC to avoid the manual copies that are not enought accurate .

[bid178678]

Do you a contact for Condor XC after sale ?

[fytfh]

this bitting code must be 33224311?

[klesk1986]

this bitting code must be 33224311?

Almost correct - sholud be 33224211 (exist in series 1-6000, number 2259)

[Asifmehmmod1]

Samic Why condor mini cant decode lexus toy48 and toy40 keys?
i mostly cut lexus keys and i cant decode it by condor mini..

[Samic]

Samic Why condor mini cant decode lexus toy48 and toy40 keys?
i mostly cut lexus keys and i cant decode it by condor mini..

friend, Condor MINI usually decode/cut key as the standard thickness 3mm, if the key is single side(thickness no more than 3mm, such as 2.5mm or 2mm)
then you should add a shim(such as business card) under the key, let the key thickness more than 3mm(around 3mm).
sample1.jpg sample2.jpg sample3.jpg

[sleepyrz]

He finally passes by and that's what we get.......

Hey samic where is m4 jaw

I got some keys I'd like to be able to cut

[PremierD]

He finally passes by and that's what we get.......

Hey samic where is m4 jaw

I got some keys I'd like to be able to cut

Then go to Timpsons you plank .....

[Asifmehmmod1]

Thanks for quick reply..
i was able to decode toy40 and toy48 only 4-4 cuts. with 8-8 cut it still dont decode ..(have latest sw version of condor)
but if i manually put the bitting it cut the key.
Thanks

[tkmotors]

Hi
Anybody decode citroen sx9 keys with condor mini?I was trying to duplicate this key but condor start the process and after 3 second stops.

[Samic]

Hi
Anybody decode citroen sx9 keys with condor mini?I was trying to duplicate this key but condor start the process and after 3 second stops.

currently SX9 and FO21 keys cannot support decode function, just enter bittings then cut directly.
we will add SX9 decode function, engineer still working on that.

[whiskeyman]

currently SX9 and FO21 keys cannot support decode function, just enter bittings then cut directly.
we will add SX9 decode function, engineer still working on that.

have you tried contact instacode samic
and get it integrate with this program

am sure you guys sell enough machines that would befit all parties

[baboonia]

How are you guys cutting the Prius Emergency Key on the condor, all this time I never ran into cutting he Prius key and it was too short to make it to the second line from the top

Has anyone figured out a good workaround for this? The pullout 2004-2009 Prius emergency key is too short to reach the 2nd line like a TR47 blank.

Perhaps Condor can modify the software to allow you to "move" the line to position 3 or 4 from the top via software for keys like this?

I know I can cut onto a TR47 then copy with a side by side duplicator but it would be nice if my $3000 machine can do it directly.
1.jpg