immo in eeprom..................
remove board = immo off
fill FF in eeprom = off
with off - MIL will on
can i just move this immo board to replacement ECU to start car?
can i just move the eeprom on board, or need whole board?
thanks in advance!
Tools owned -
AD100 PRO, Lonsdor, FVDI 18, FVDI 20, VVDI PROG, VVDI2, VVDI MB
CGDI BMW, SuperVag, Renault ECU tool, OBDstar X300 DP Plus, AUTEL im508
VVDI Mini Keytool, KeyDIY KDX2, SBB, ACDP CAS/KVM
Opcom, VCDS pro, Diagbox, Multiecuscan, Forscan, JLR SDD
immo in eeprom..................
remove board = immo off
fill FF in eeprom = off
with off - MIL will on
need help
now my goal is to buy xp-005
who will help?
sdnatlst (24th November, 2021)
Thanks RAFAL, ill swap the eeprom to the replacement ECU then!
Tools owned -
AD100 PRO, Lonsdor, FVDI 18, FVDI 20, VVDI PROG, VVDI2, VVDI MB
CGDI BMW, SuperVag, Renault ECU tool, OBDstar X300 DP Plus, AUTEL im508
VVDI Mini Keytool, KeyDIY KDX2, SBB, ACDP CAS/KVM
Opcom, VCDS pro, Diagbox, Multiecuscan, Forscan, JLR SDD
Hi
Just want to know if someone tried ff fill of the eeprom. Does the car run normally or will go in limp mode with mil light on.
Thanks
check if its automatic too,if so,it will have some issues
If i Helped you,use thanks and rep button to thank me back
fuzz1 (3rd July, 2022)
Hi
Yes automatic. Is there anyway to get around those issues? Don't want to touch the original ECU to avoid any possible problem with the owner
hello masters
i need your help
i have an ecu from Honda CR-V, 37820-PNB-R01,with manual transmition.
I have read the eeprom from ecu and from immo box and I would like from someone to synchronise them to start the car.
In attach include the eeprom from eng ecu and from immobox
Regards !!!
speedservice (5th July, 2022)
thanks for the archive
Bookmarks