FREE EDC 16/17 Stage 1 or tuning + checks & dpf/egr off

[seanckp]

Upload your oris of diesel edc16 /edc17 ecu and i will make professional level tunes with whatever you request


Dont forget to thanks if you're happy !

[poskus]

Upload your oris of diesel edc16 /edc17 ecu and i will make professional level tunes with whatever you request


Dont forget to thanks if you're happy !

edc 15 posible? :torn:

[Creative555]

Good afternoon.BMW?
flaps+egr+tun?

[alonedark]

try whith this stg1 eco

[seanckp]

Of course, send it on

[seanckp]

try whith this stg1 eco

Thanks & rep for pass

[alonedark]

380 anymore ??? this is bre engine send me pass

[seanckp]

380 anymore ??? this is bre engine send me pass
You asked for a stage 1 eco tune ?? if you wanted more power should have just said a strong stage 1 and not mention eco.

i will pm the pass

[jarvismaster]

Hello!

Info about my car:

2005 BMW E60 525D 2.5L 177hp Automatic Transmission, DPF and EGR Removed, everything else is stock.

EDC16C31
HW: 0281012190
SW: 1037387646

Please make strong Stage1 for me, if possible 220-230hp, with EGR and proper DPF OFF.

Thank you!

[seanckp]

Good afternoon.BMW?
flaps+egr+tun?
Unfortunately i dont have solution for this ecu for egr and flaps, but the tune is done with cks
Thanks & rep for pass

[lukasz12345]

hi

Stage 1 Peugeot 1.6 HDi FAP DPF off please

Thank you

[diags]

Hi

Please i need stage 1 for mercedes w203

0281012449
CRD3.44 EDC16C2
Best Regards.

[seanckp]

hi

Stage 1 Peugeot 1.6 HDi FAP DPF off please

Thank you


Thanks & rep for pass
Unfortunately i dont have a solution for FAP off, but dpf is off and cks ok

[alonedark]

I’m sorry but I check and very bad tune , no eco tune, no 385nm all the file is very bad for engine , porcentual file bad bad bad

[seanckp]

I’m sorry but I check and very bad tune , no eco tune, no 385nm all the file is very bad for engine , porcentual file bad bad bad
Can you explain to me how its bad ? and maybe show a file of your own ? and im sure the similarity would be undenable....
All changes were used excel using forecast and not percentage based at all.....
the reduction of the drivers wish maps below ~60% would indeed improve the fuel economy unless you're aware of another method

[seanckp]

Hello!

Info about my car:

2005 BMW E60 525D 2.5L 177hp Automatic Transmission, DPF and EGR Removed, everything else is stock.

EDC16C31
HW: 0281012190
SW: 1037387646

Please make strong Stage1 for me, if possible 220-230hp, with EGR and proper DPF OFF.

Thank you!

Thanks & rep for pass

[jarvismaster]

thank you sir, please provide pass for me, thx!

[alonedark]

If you need I can show your file

here you have driver wish 549 ???toque?? smoke limit porcentual







tha last picture is % you used in smoke limiter

[Klaudas1331]

If you need I can show your file

here you have driver wish 549 ???toque?? smoke limit porcentual







tha last picture is % you used in smoke limiter
What do you expect :D looks like he came to test his "tuning" methods on this forum

[seanckp]

If you need I can show your file

here you have driver wish 549 ???toque?? smoke limit porcentual
tha last picture is % you used in smoke limiter


Maybe you havent seen many ori files, pretty much all files come with way more torque than the actually produce on their drivers wish maps, its the limiters that prevent
it from making the kind of power, the torque limiter then limits it down to 450s which is kind of funny because you complained about when i said 380 but now because you see its more its a problem ? LOL and the smoke map, which i used calculations to produce roughly around 380s.....
I dont know what you expect the smoke map changes to look like but again all ori files have their peaks early on, decrease and the towards the end increase again.
Safe boost pressures were set, rail pressure wasnt touched like alot of stages 1's are when its never acutally required... but eh thanks for the feedback mate

[alonedark]

I said, is this eco tune?? Another thing, this is a inyector pump, don t have rail pressure

[seanckp]

Hi

Please i need stage 1 for mercedes w203

0281012449
CRD3.44 EDC16C2
Best Regards.

Thankss & rep for pass.
Report back, I increased IQ from 43mg to 60, torque to IQ maps support from orignal up to 80 so let me know if you want more power

[diags]

Thankss & rep for pass.
Report back, I increased IQ from 43mg to 60, torque to IQ maps support from orignal up to 80 so let me know if you want more power
Please pass

[PelsonBMW]

If you need I can show your file

here you have driver wish 549 ???toque?? smoke limit porcentual




tha last picture is % you used in smoke limiter


whats the program that you use ?

[seanckp]

I said, is this eco tune?? Another thing, this is a inyector pump, don t have rail pressure
Great thing is your chat is saved you said exactly "try whith this stg1 eco "
and I am aware hence why I said "rail pressure wasnt touched like alot of stages 1's are" alot as in plural not your map, generalized maps.......

[OHANAJAN]

Hello,

Can you do a strong stg 1 file for a Peugeot Landmark EDC17C81

[PelsonBMW]

Lets see what you can do ;) Strong stage 1 without smoke :)

[Creative555]

Thanks. Can I have a password?

[rtito316]

hola amigo hyundai santa fe edc16c36 puedes hacer la etapa 1 la mas poderosa gracias y si puedes con hardcut