PDA

View Full Version : Fiat Freemont EDC17C49 IMMO OFF



roger06
18th January, 2023, 01:07 PM
Hello

Need immo off in Fiat Freemont EDC17C49. Solution 8B022022>00008212 not work.

tato10
19th January, 2023, 01:28 AM
Hello

Need immo off in Fiat Freemont EDC17C49. Solution 8B022022>00008212 not work.

here you go, flash inmo off and checksum ok, pass after tanks + reputation ..
regards

roger06
19th January, 2023, 09:36 AM
here you go, flash inmo off and checksum ok, pass after tanks + reputation ..
regards

Did not work. Doesn't crank. Immo lamp is on/flashing.

elektronik325
19th January, 2023, 10:34 AM
Post eeprom from ecu

roger06
19th January, 2023, 10:54 AM
EEPROM in attachment

brend
19th January, 2023, 11:04 AM
By flash possible to , just need right optoin for that's.


Here one ...........937191

Report about resault's .

elektronik325
19th January, 2023, 11:16 AM
Eeprom solution work 100% on the ecu. Tested meny one.

roger06
19th January, 2023, 11:37 AM
By flash possible to , just need right optoin for that's.


Here one ...........937191

Report about resault's .

Solution 8B022022>00008212 not work, checked.

tato10
19th January, 2023, 12:42 PM
If you don't have valid key don't crank, try to crank from starter relay and car star, this is a tested solution.

roger06
19th January, 2023, 12:56 PM
I have valid key. On ori dump car crank and start but engine dies after a few seconds (immo light on). On your dump not even crank and immo active.

elektronik325
19th January, 2023, 01:04 PM
If you don't have valid key don't crank, try to crank from starter relay and car star, this is a tested solution.

Yes it ok. Im make in eeprom and work fine the ecu. If You heve no key. Must bridge starter relay or make line from key swich to starter. And solder key lamp from dash

roger06
20th January, 2023, 09:42 AM
Thanks for your time and help but nothing work, checked all.

Information for others - I do not share any passwords.