FIAT PUNTO 1.2 IAW 5AF immo off

[superehj]

Hello, this ecu is worth reading kess to make immo off, thanks

[elektronik325]

Hi from what I remember it's the kess that reads part of the ecu map. All reading is needed here. Add the file you read

[superehj]

I have read with the kess and modified with decoding 3.2 5af total, and it does not start, I can no longer restore, I think it is brick

[superehj]

this is reading and writing

[elektronik325]

May be. Did you read it in the car? Is it on the table? You can try in boot mode. you need to drill a small hole or take apart the top of the ecu. Piasini does this ecu very well. Or ori Iaw programmer. I don't remember if the galleto had this ecu. But I guess not.

[superehj]

read the car kess ,the car does not start and I cannot enter another map, kess does not recognize the ecu

[elektronik325]

Try to connect with a diagnostic tester if there is communication with the ecu. As there will be a driver on the table and put in boot mode.

[superehj]

there is no communication with the diagnosis, I think this brick

[elektronik325]

Ecu on table boot mode. Writing ori file. Or eny on beckup from ecu. If not work new ecu