honda sh

[dashtool2016]

can you help me to change km in honda sh original eeprom has 127054 i need 16700 thanks

[Diagcar1]

Misread, read as 16bits

[dashtool2016]

Reading at 16x now at 8x and verified and I take several readings with the programmer and the file is the same and the box works fine. Do you see any problem?

[jomberykaso]

Reading at 16x now at 8x and verified and I take several readings with the programmer and the file is the same and the box works fine. Do you see any problem?

still bad read.

[Diagcar1]

Yes I see a problem, it's also misread.

[dashtool2016]

may have corrupted the dump by reading ? I do not understand minipro carprog vvdi all the same reading: s I take a photo of the marker turned on to show the version to see if they can have some correct garbage can to write thanks

[jomberykaso]

just read again and dont program, check the contacts of eeprom

[Cllau]

Had you removed eep before reading?

[dashtool2016]

yes guys something incredible but true i am not able to read they are all the same same dump i have box on and it works fine it shows the value 127054 then dump still no damage but i cant get another reading try to change brand atmel st etc but nothing changes :S i go to write another memory and this save I will look for a similar frame dump and I will let you know a million thanks

[dashtool2016]

now different readings can check ? Thank you

[jomberykaso]

still bad....

[Cllau]

what tool are using for reading?:captain::giveup:why not take a photo of the eep and post here, maybe you are reading the wrong chip if you played with data and there is no error in display..

[dashtool2016]

can i send pics of eeprom try 20 programmers and 20 different ways i always get same reading

[156alfa]

hello friend
sure that if you would have sent the photo of both the Tssop
or the rear dash you would have already solved the problem
Greetings from Italy

[dashtool2016]

I didn't have a photo, sorry now I've had a moment to take the photo so they can see the eeprom

[Cllau]

my feeling is that your bad reading is between the minipro and vvdiprog adapter... I'm not sure that pin numbers are correct and match each other.... I don't have minipro to check maybe other mates here will be able to confirm....

[Diagcar1]

Solder eeprom back to dashboard and check if the dashboard still work.

[dashtool2016]

Do you have any dump for this bike? and record a new dump? maybe corrupt I will try to try again but I am afraid the pcb is already very weakened from removing the display many times

[Cllau]

To solder/unsolder with hot air gun takes only a few seconds, make sure you don't overheat the board and its components . That way you will not damage the board.

[156alfa]

hello friend
I am attaching 2 photos and a file in the hope that it is the same dash
next time before unsoldering one of these EEPROMs
ask on the forum if someone has already done a dash equal to
what you have saves you time and trouble
good luck
Greetings from Italy