elmaro
26th January, 2023, 11:30 AM
Hi.
I have problem with VW Polo 2018 after crash.
Error stored in the steering assist.
15788544 - Crash Shut-Down Activated
I followed the procedure below, with the help of VCP System:
1) Factory reset in basic settings.
2) Flash 0044 module with ODIS-E 4 times
a) flash 2Q1909144ZT, next one is:
b) flash 2Q1909144M, next one is:
c) flash 2Q1909144ZU, and last flash is:
d) flash 2Q1909144J.
3) Use ODIS-E to upload parameters file (use .zip file, do not unpack!) via "Write data set" option on 0044 module.
4) Steering Angle Sensor (G85) calibration (ODIS-S Guided Function).
Everything went right. The power steering works, the Steering Angle Sensor (G85) has been performed, but the error remains 10529280 - Data Set Missing.
I tried to save, using VCP flasher, the file polo_2q1909144j_steering.zip, found in the VCP repository, but despite the correct loading, the error does not disappear.
I don't have access to ODIS. Is it possible to parameterize via VCP?
I have problem with VW Polo 2018 after crash.
Error stored in the steering assist.
15788544 - Crash Shut-Down Activated
I followed the procedure below, with the help of VCP System:
1) Factory reset in basic settings.
2) Flash 0044 module with ODIS-E 4 times
a) flash 2Q1909144ZT, next one is:
b) flash 2Q1909144M, next one is:
c) flash 2Q1909144ZU, and last flash is:
d) flash 2Q1909144J.
3) Use ODIS-E to upload parameters file (use .zip file, do not unpack!) via "Write data set" option on 0044 module.
4) Steering Angle Sensor (G85) calibration (ODIS-S Guided Function).
Everything went right. The power steering works, the Steering Angle Sensor (G85) has been performed, but the error remains 10529280 - Data Set Missing.
I tried to save, using VCP flasher, the file polo_2q1909144j_steering.zip, found in the VCP repository, but despite the correct loading, the error does not disappear.
I don't have access to ODIS. Is it possible to parameterize via VCP?