Vivaro B '19 BCM/UCH dump need

[gixxer]

Hello

After unsuccessful keyprog (im508) bcm lost all keys, now learnt a new key, but car not crank no fault code. Live immo data in bcm " SDM unit no communication" in sdm no fault code...

Please a virgin or a normal dump please.

Thank you

[elektronik325]

Hi. Tre in bcm parameters how keys is programet. If one or two or zero. Cen tre programet only ory key. If programet ok. car start and work. First make only one key. Ori from car.

[gixxer]

Hi. Tre in bcm parameters how keys is programet. If one or two or zero. Cen tre programet only ory key. If programet ok. car start and work. First make only one key. Ori from car.

BCM stored key 1. The original key I can't re-learn only a new key accepted. The "new key" always successful reprogramming. I try online SPS the BCM but not run because get a warning message SDM unit not configured this bcm"

[Ninjor s]

BCM stored key 1. The original key I can't re-learn only a new key accepted. The "new key" always successful reprogramming. I try online SPS the BCM but not run because get a warning message SDM unit not configured this bcm"

Can't relearn old key because you did akl,program always ask you and warns you that will delete all key.
You where supposed to add key not all keys lost.

[gixxer]

Can't relearn old key because you did akl,program always ask you and warns you that will delete all key.
You where supposed to add key not all keys lost.

Thanks, OK, akl, but learnt a new key this stored bcm car not crank....

[davekeydhc]

Hi Guys i have a simular problem on vivaro B adding key. 2017 good battery support and good internet. done lots before no problem. using Autel im 600.
Reading flash wasn't complete it froze then appeared to finish but wouldn't let me save file. it then read Dflash and saved ok. But when pin calculation was attempted it failed to calculate pin. Dash is dead and no comms to dash abs audio uch. so bsi is corrupt. i carn't rewrite files as these aren't comlete and no comms. so am changing ecu set complete.
My thoughts are that i went in under vauxhall instead of renault traffic. never had a problem under traffic.

[gixxer]

Hi Guys i have a simular problem on vivaro B adding key. 2017 good battery support and good internet. done lots before no problem. using Autel im 600.
Reading flash wasn't complete it froze then appeared to finish but wouldn't let me save file. it then read Dflash and saved ok. But when pin calculation was attempted it failed to calculate pin. Dash is dead and no comms to dash abs audio uch. so bsi is corrupt. i carn't rewrite files as these aren't comlete and no comms. so am changing ecu set complete.
My thoughts are that i went in under vauxhall instead of renault traffic. never had a problem under traffic.

I solved virginize BCM and online SPS after reprogrammed key.