BMW E63 645Ci Map Controlled thermostat

[cebula203]

Hi,

Can anyone help me find or change the map controller thermostat threshold temperature? I think stock temperature is around 114*C and I would like it closer to 90*C.

Thanks!

[GPTunes]

There is no such map in BMW MEVD17 ecus. Coolant temperature depends on many many factors. Don't worry about it. If you push the car hard enough, it will get closer to your desired 90C on its own.

[cebula203]

Hi GPTunes, This is Bosch ME9.2 ECU. The engine is running much too hot for my liking. Oil temp routinely exceeds 120*C which is just absurd.
I'm more then certain that this car has Map controlled thermostat in which you can alter setpoint of the heater that will allow thermostat to open earlier.

[GPTunes]

Weird I could not line it up with any ME9 BMW mappack/damos I had, what is the sw version?

[cebula203]

Weird I could not line it up with any ME9 BMW mappack/damos I had, what is the sw version?

It's 370376

[cebula203]

Is anyone able to help? :/

[MIKUr1]

I was looking for this map very long and ended up with modified thermostat without heater. Then I delete DTC for E-Thermostat and now my car heating up to maximum 94C and got no errors. Another advantage of this modification is confidence, that my car won't go back to higher temps in case of heating element failure.

[Lambda1]

Is anyone able to help? :/
Maybe you should help others before beeging for help. Over 1,5 years here but 6 posts of want...
Its doneable in software but I you dont want or cant help others you maybe need pay someone for.

[cebula203]

I can pay you if that's the issue ;)
I rather not help anyone yet as I'm not so confident about my abilities. I'm currently learning all this stuff and as you probably know it takes a while... I will give back to the forum and it's users as soon as I will be able too. Also, I treated my last post more as a bump, not a demand...

[MIKUr1]

I still think, that modified thermostat is better option ;)

[cebula203]

Hi MikuR1, Could you elaborate?

[MIKUr1]

I have got modified thermostats, with new bimetal element, calibrated to 88C or 85C or colder if you want. It has deleted heating element and behaves like old good classic thermostats.

[EdekGarage]

I did it few days ago in me9.2.2 n62b48 (flash 2 mega) and with custom thermostat there was a check on dashboard . Not sure in me9.2 check appears but I can find any dtc in this ecu example thermostat cooling coś tam :) if you want I can help

[cebula203]

It would be great if you could :)