Opel Astra h 1.9 cdti 120

[davidbcn]

Hello. I have done a reprogramming to my Astra H 1.9 cdti. The problem is that I don't notice much increase compared to other cars, maybe the tuning is missing something or some map is limiting another and I can't find the fault, the car is going well but I think it could be improved.

Please, I need help from an expert to check where the error is or if the reprogramming could be improved.


Thank you very much in advance.

[antonis132]

Try this stage 1
I think you have to read original injector codes and write them after write my pass
Pass after reputation and thanks

[davidbcn]

Thank you very much for your help.


I try it and I tell him, I didn't know that I have to rewrite the injectors.


Could you tell me the password of the file?


A cordial greeting!

[antonis132]

This file download

[davidbcn]

Good afternoon, thanks for the file but it doesn't work, the maps don't come out well if I compare it with the original one with ECM titanium, it probably won't work.


The file that I have put above is already modified but there is something wrong that does not give the desired power.


I put the source file and the modified one to see if we can know where the error is.


Thanks for your help.


Regards,

[davidbcn]

Good morning, I wanted to know if it is safe to load this map in the car.


From what I can see the stock one has 3 more visible maps in csm.


I would NOT like the switchboard to be blocked, although I don't think so since both maps occupy the same space.


Can someone tell me if I can load it and test it?


I also had the doubt that my car is an Astra H 120ps engine z19dt but ECM reads the cartography as if it were a 150ps, does anyone know why?


Thanks in advance..

[qni666]

Good morning, I wanted to know if it is safe to load this map in the car.


From what I can see the stock one has 3 more visible maps in csm.


I would NOT like the switchboard to be blocked, although I don't think so since both maps occupy the same space.


Can someone tell me if I can load it and test it?


I also had the doubt that my car is an Astra H 120ps engine z19dt but ECM reads the cartography as if it were a 150ps, does anyone know why?


Thanks in advance..

FOrgot this shit ECM use winols for compare here have many maps ex. Injection duration cr, gear limiter, soi,lambda calculation and ecm cant find it

[davidbcn]

Thanks, so can I write the map anyway? If it doesn't work, rewriting the one from before, you shouldn't have a problem, right?


Thanks in advance.

[qni666]

Thanks, so can I write the map anyway? If it doesn't work, rewriting the one from before, you shouldn't have a problem, right?


Thanks in advance.

if u have problem just write file before read this edc is hard to brick dont worry