dsg dq200 mqb dtc remove

[pcbox]

Gerabox is fine... Driving about a year like this.

I wan to try removing dtcs from it

p0914 i u0103


Thanks for any help

[Nick24]

Here file, test

[pcbox]

Here file, test


0000 unknown error
and still u0103

[Nick24]

send Vag Code

[pcbox]

Here screen shot


10633 - Selector Lever P0914

25472 - No Communication with Gear Selector Module U0103

[Nick24]

try this....

[pcbox]

Not working, Engine light back after few starts and two fault 0000 now

[icezero2010]

Not working, Engine light back after few starts and two fault 0000 now

here test so

[pcbox]

Again, faults back





Address 02: Auto Trans Labels: 0CW-927-769.clb
Control Module Part Number: 0CW 300 048 J HW: 0AM 927 769 E
Component and/or Version: GSG DQ200G2_M H05 0611
Software Coding: 0014
Work Shop Code: WSC 00028 028 00066
ASAM Dataset: EV_TCMDQ200021 001001 (VW37)
ROD: EV_TCMDQ200021_VW26.rod
VCID: 43854C05CA84DA9792-8016
2 Faults Found:


10633 - Selector Lever
P0914 00 [012] - Electrical Malfunction
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 0
Fault Frequency: 1
Mileage: 257268 km
Date: 2023.02.06
Time: 15:29:14


Engine RPM: 18.75 /min
Engine torque: -100 Nm
Vehicle speed: 76 km/h
Control Module temperature: 53 °C
CURRENT pressure: -10.0 bar
Clutch: primary stat: Driving
selected gear: GANG_5
Driving position: N
Accelerator pedal position: 0.0 %
DTC memory status: 256


25472 - No Communication with Gear Selector Module
U0103 00 [012] - -
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 0
Fault Frequency: 1
Mileage: 257268 km
Date: 2023.02.06
Time: 15:29:14


Engine RPM: 18.75 /min
Engine torque: -100 Nm
Vehicle speed: 76 km/h
Control Module temperature: 53 °C
CURRENT pressure: -10.0 bar
Clutch: primary stat: Driving
selected gear: GANG_5
Driving position: N
Accelerator pedal position: 0.4 %
DTC memory status: 17408

[pcbox]

Any other variant?

[kotos96]

Any other variant?

Try this and let me know if it works

[pcbox]

Is totally same file as Nick v2 file p0000 p0000

[kammykhan]

Wow the level of intelligence scares me on here. You need to fix your coms issue with selector leaver. Clearly there is a problem hence why the fault code is coming up! Check your can bus wires! don't just delete DTC's.

[pcbox]

Whole transmisison was changed. Car works totally fine, day since than but this fault is allways present.

[Fleshy1232]

Whole transmisison was changed. Car works totally fine, day since than but this fault is allways present.


you can try this maybe work.
pass in PM

[yarin]

i have this problem , what you suggest to do?
i clear the DTC and its came back after few times..
please help me what to do