sedat20
9th February, 2023, 02:47 PM
I'm in a nightmare.Peugetot 107 1KR, the motor starts for two seconds and off.
In immobox 0 errors, in the engine ECU only B2799 -> controller communications immo defective.
Made these tests:
1. Test the Ecu Power ( Engine and immobox )
2. Test links Immobox -> Engine Ecu
12 to 78 ?
13 to 51
3. Test the two keys with Zed-> perfect Keys
4. Made several times Engine ECU -> immobox alignment
Made with PP2000,
done with PIN 4-13 EOBD
5. Vergin immobox unit.
Reprogrammed the two original keys > OK
Aligned engine ECU -> immobox.
6. Programmed engine control unit with different file (not virgin) and remade alignment.
Always the same defect, the motor starts and turns off after two seconds.
The engine switches off because the engine control unit inhibits the ignition and injection.
Always just B2799 error.
Can someone check if the two units are aligned?
Any ideas?
In immobox 0 errors, in the engine ECU only B2799 -> controller communications immo defective.
Made these tests:
1. Test the Ecu Power ( Engine and immobox )
2. Test links Immobox -> Engine Ecu
12 to 78 ?
13 to 51
3. Test the two keys with Zed-> perfect Keys
4. Made several times Engine ECU -> immobox alignment
Made with PP2000,
done with PIN 4-13 EOBD
5. Vergin immobox unit.
Reprogrammed the two original keys > OK
Aligned engine ECU -> immobox.
6. Programmed engine control unit with different file (not virgin) and remade alignment.
Always the same defect, the motor starts and turns off after two seconds.
The engine switches off because the engine control unit inhibits the ignition and injection.
Always just B2799 error.
Can someone check if the two units are aligned?
Any ideas?