Siemens sirius 32n Immo Off

[98secret]

HI can someone turn off immo clio 1.4 8v with ac. is file for siemens sirius 32n
S110138000
8200059086
I try some softwares but not work.read by ktag
Cheers

[ziko]

Here, cut pin58


wbr

[98secret]

not work pls help

[ziko]

Diag,live data immo status.... will see
Hope is not CAN ecu. What year is car?

[elektronik325]

Diag,live data immo status.... will see
Hope is not CAN ecu. What year is car?

Hi did not write what is the number at the end of S110138000 or A, B, C. But 99% of it is without Can.

[98secret]

year of car is 2000. i dont see any CAN ic

[98secret]

Hi did not write what is the number at the end of S110138000 or A, B, C. But 99% of it is without Can.
i will write tomorrow

[elektronik325]

year of car is 2000. i dont see any CAN ic

You can also see the fastest if you have used pin 58 in the cube as it is without can. All Can systems have an empty pin 58

[jomberykaso]

here is your file:

[98secret]

okey it is without can because this car was with immo off , i connect the cable of 58 pin and car dont start.i dont know it was for immo

[elektronik325]

okey it is without can because this car was with immo off , i connect the cable of 58 pin and car dont start.i dont know it was for immo

Yes pin 58 is the immo code line must be cut otherwise the ecu will be blocked. What happened to you. Cut the wire. Upload the odjomberykaso file and it will work.

[98secret]

Yes pin 58 is the immo code line must be cut otherwise the ecu will be blocked. What happened to you. Cut the wire. Upload the odjomberykaso file and it will work.
have you checked the file or you have another solution. i am scary and tired trying files because i have tried all free softwares with no luck.

[jomberykaso]

Just use my file, cut pin 58 or remove 333 resistor inside ecu.

It should work perfectly.

[ziko]

okey it is without can because this car was with immo off , i connect the cable of 58 pin and car dont start.i dont know it was for immo

I told you something strange,immo was rewrite but my file must work too

P.S. Every other sirius32 when import in winols says will be swuped as siemens.... your file not shows that massage
I just saw "jomberykaso" file, I never did as he did... and I made maybe more then 100 sirius32 , also included to friend to calc. but good to know if it works

[98secret]

I told you something strange,immo was rewrite but my file must work too

P.S. Every other sirius32 when import in winols says will be swuped as siemens.... your file not shows that massage
I just saw "jomberykaso" file, I never did as he did... and I made maybe more then 100 sirius32 , also included to friend to calc. but good to know if it works
it is a little late but the car worked with jomberykaso (https://www.digital-kaos.co.uk/forums/member.php/390353-jomberykaso) file ,thank you to him + reputation!