Audi A4 2001 login code

[omglol]

Hello!

Could somebody tell me login code for ECU EDC15P+ from 2001 Audi A4 1.9TDI AWX? Attached dump from 24c04. Thanks!

[Stopro92]

1550.......

[omglol]

1550.......

Thank you, I got that too from RB4 cluster, but I cannot adapt used une ... when I get to adaptation, channel 50 and enter 01550, I get a "MALFUNCTION".

Is it possible because the ECU is immo OFF (I uploaded original ECU dump, not immo off version)? Thanks.

[Stopro92]

What are you trying to do? New ecu or new dash?

[omglol]

What are you trying to do? New ecu or new dash?

New dash. I put dash to newmode and tried to transfer immo from ecu to used dash, but I get "MALFUNCTION" when I enter "01550" in channel 50.

[Stopro92]

It seems to me that you must probably have a pin from the new and old counter to replace, check the procedure on the rosstech wiki there is described.

[omglol]

Yeah, already done that. It should work, but it does not ...

[evgeny87]

Turn immo on first, then try to adapt what you want.

[Stopro92]

I'm not sure but... If you do it with vcds counter probably can not be in new mode either.
Then if you have an ecu with immo then the meter replacement procedure should work.


EDIT: I checked and the counter can not be in the new mode if you want to match it with vcds, disable the new mode and try to do the replacement procedure then and it should be ok. Remember that you must have a pin for the new and old meter.

[armi]

(EDIT: I checked and the counter can not be in the new mode if you want to match it with vcds, disable the new mode and try to do the replacement procedure then and it should be ok. Remember that you must have a pin for the new and old meter.)

100 % right, excacly.