W211 2007 change mileage

[kautuvera]

Hi all,
For reducing Mercedes E350 thirty kilometers What parts of the year 2007 opened the door

How can i adjust KM on Mercedes E series model 2007?

W211

I have given AK400

can anybody help me?

Please help me Thanks

[aeroyas]

you can change mileage of this car using AK 400, first read the processor in the EZS module and change mileage on it using software like NYO4 or LICZNIK the open the dashboard and read the eeprom inside and change mileage on it too. job is done ;) good luck

[Viliuxxx]

you can change mileage of this car using AK 400, first read the processor in the EZS module and change mileage on it using software like NYO4 or LICZNIK the open the dashboard and read the eeprom inside and change mileage on it too. job is done ;) good luck

Mcu in EZS module 9S12 BDM Locked!

[aeroyas]

that can be read by X Prog M full authorisations or ETL programmer

[Viliuxxx]

that can be read by X Prog M full authorisations or ETL programmer

Or DigaPro, Enigma, Elprosys and etc. device :devil:

[kautuvera]

ak400 How is Wire connection?

[juozas10]

that can be read by X Prog M full authorisations or ETL programmer


Or DigaPro, Enigma, Elprosys and etc. device :devil:


ak400 How is Wire connection?

Hi.
912/9S12/9S12X Programmer V1.54, look at this

Best regards.:wink:

[workas]

you can change mileage of this car using AK 400, first read the processor in the EZS module and change mileage on it using software like NYO4 or LICZNIK the open the dashboard and read the eeprom inside and change mileage on it too. job is done ;) good luck

Don't forget about ASSYST module (http://codecard.lt/carprog/software/carprog-dash/s7-5-mercedes-benz-assyst-explorer/prod_118.html)

[kautuvera]

One map AK400 does not connect you?

[juozas10]

Don't forget about ASSYST module (http://codecard.lt/carprog/software/carprog-dash/s7-5-mercedes-benz-assyst-explorer/prod_118.html)


Not forget ZGS,
912/9S12/9S12X Programmer V1.54, look at this.

Best regards:wink:

[kautuvera]

This is not my friend, the number of those basic circuit is connected to 10 is

[juozas10]

Hi all,
For reducing Mercedes E350 thirty kilometers What parts of the year 2007 opened the door

How can i adjust KM on Mercedes E series model 2007?

W211

I have given AK400

can anybody help me?

Please help me Thanks


This is not my friend, the number of those basic circuit is connected to 10 is


AK400 key programmer

Best regards.

[kautuvera]

This is my purpose "

[kautuvera]

This is my purpose "


Please visit Good

[kautuvera]

Please visit Good

[juozas10]

Look at this.Maybe this will help you.
Best regards.:wink:

[mercis]

and what make with zgw bsg(batterysteuergeraet)and
ecu(particelregeneration)
ak400 is for key make(bad tool from china)

[Speedofix]

batteri modul read milage from odometer no problem!
Particelfilter just restart particelregeneration with star diagnostic

[kautuvera]

I just want to connect wires would not know

[kautuvera]

Hi. I would like to know how the wires from AK400 are connected to the EZS? If it is possible i like to have the schematic diagram of these wires connecting A400 To EZS. thanks again for helping.

[kanzus]

Forget about AK400, you can bloack your EZS or zgw when using it, be carefull, i damaged couple of ezs like this.
Use Rosfar programmer "bmw 912 programmer" (blue case), it's the best way, you have on board connection wire to read write it, and it tells you when connection is wrong. AK400 does not !
Good Luck.

[frankhp]

yes ok hello

[milanista]

In W211 the mileage is stored in many other modules besides CGW, EZS and Dashboard!

[pepi]

Hi all,
For reducing Mercedes E350 thirty kilometers What parts of the year 2007 opened the door

How can i adjust KM on Mercedes E series model 2007?

W211

I have given AK400

can anybody help me?

Please help me Thanks

If you didnt do before any of this EZS beware .
If you want to do it anyway upload the photo of your EZS to tell you the solution how to connect it to the AK400.
Upload the eeprom dump containt of Dashboard too.
Upload the photo of ZGW ,I will try to help you to read ,after you will need to correct service data on it.

[adikk]

Hi. I would like to know how the wires from AK400 are connected to the EZS? If it is possible i like to have the schematic diagram of these wires connecting A400 To EZS. thanks again for helping.
Hi friend!
I tray connect on number, but AK400 dont work.
I tray connect on color, AK 400 start read, but dont possible. I connect 0-Black - graund, 2-red - Power, 4- Yelow (Reset), 7- purple (BKDG), but i dont know White (Extal), may be 9. I write http://www.digital-kaos.co.uk/forums/f136/manual-ak400-118754/ but i dont have answer.

[nothing]

Hello ,

i have AK400 V2 but it can read W211 EZS , any suggestion ?

thanks