View Full Version : Dreamup can see box but no ping
corky_croydon
28th October, 2008, 11:00 PM
Hi guys,
I am using a usb to serial adapter that is connecting on com port 4.
When I boot dreamup and click connect, followed by plugging in the dreambox, I get the following:
21:56:49 box type: DM500
but that is as far as it goes. No ping and no flash option.
Any suggestions? Many thanks
P.S it's a new blackbox 500.
Curious123
28th October, 2008, 11:26 PM
I have never used a usb to serial adapter but you are much better off having the proper null modem cable when flashing a dm500. It always works and is always used as the last resort for recovering the dm500 when all else fails.
portbhoy
28th October, 2008, 11:33 PM
Check your Com port settings mate http://www.digital-kaos.co.uk/forums/f34/how-change-com-port-settings-using-usb-serial-adapter-1926/
yamar1
29th October, 2008, 12:12 AM
He's proberbly using a usb-serial adaptor plugged into a null modem cable. anyway, i have never had any joy with a usb-serial adaptor, iv heard people have using various different drivers but i always find a computer with a built in 9pin port never fails, i know a lot of newer computers dont have them (like mine didnt!) but the 9pin adaptor card which fits and installs permenently into your computer solves all these probs is well worth a fiver, check them out on ebay.;)
alliv
29th October, 2008, 12:45 AM
i had the same prob till i bought a good usb adapter that was vista compatable that is if you are using vista which i suspect is the prob.
Devilfish
29th October, 2008, 01:10 AM
Set the adapter to com1 using the guide above and try again. Make sure the com dropdown menu in dreamup is the same as your settings on the PC. I have one of these (bought one just to try it) and it works fine (with an ajoining null modem cable).
corky_croydon
29th October, 2008, 01:53 PM
Hi, I used an old PC at my work in the end. I was using Windows XP. Would still be interested in getting it working though, so might have another go later!
yamar1
29th October, 2008, 06:45 PM
Set the adapter to com1 using the guide above and try again. Make sure the com dropdown menu in dreamup is the same as your settings on the PC. I have one of these (bought one just to try it) and it works fine (with an ajoining null modem cable).
So they do work then!, its prob the cheap ebay ones which are rubbish, i might get one from a reputable dealer vista compatable and try it on the laptop.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.