HELP SSID and VIN in cluster for MB viano 2003

[Bryanlocksmith]

Hey mates,

I have this cluster file read the eeprom I want to change the SSID and the VIN number like in the text below can anyone do this for me

PS: The original EIS was bad I got a used one and changed all the needed data with mb clinic also done the ECU and ESL made it universal all worked and car starts te cluster shows on KM ---- due to VIN and SSID is different than the EIS I setup.

I want to change the SSID and the VIN as below on the dump and write the dump back to the cluster need your help please.

The eeprom chip number is ST95080

10 16 27 D7 SSID
VIN - WDF63971313002374
MB Viano 2003

[figani]

Hey mates,

I have this cluster file read the eeprom I want to change the SSID and the VIN number like in the text below can anyone do this for me

PS: The original EIS was bad I got a used one and changed all the needed data with mb clinic also done the ECU and ESL made it universal all worked and car starts te cluster shows on KM ---- due to VIN and SSID is different than the EIS I setup.

I want to change the SSID and the VIN as below on the dump and write the dump back to the cluster need your help please.


10 16 27 D7 SSID
VIN - WDF63971313002374
MB Viano 2003

if I remember right...
make kilometers less than 100...
and you can adpat it by DAS...
it will automatically syncronize...

[Bryanlocksmith]

if I remember right...
make kilometers less than 100...
and you can adpat it by DAS...
it will automatically syncronize...

I don't need to change the KM doesn't matter for me I just want to change the SSID and VIN in the dump of the cluster

[ninety90]

I think he is saying.. if you make cluster "virgin" / under 100km .. then you can just adapt it..

[gwiazdamb]

I don't need to change the KM doesn't matter for me I just want to change the SSID and VIN in the dump of the cluster


The best solution is to do synchro via SD
As Figani #2 wrote
ninety90 #4

[Bllinda]

I did not find the VIN code of KI_95080 written in any of the dumps. I'm not sure about the SSID 10 16 27 D7, but it's stored elsewhere.


Hey mates,

I have this cluster file read the eeprom I want to change the SSID and the VIN number like in the text below can anyone do this for me

PS: The original EIS was bad I got a used one and changed all the needed data with mb clinic also done the ECU and ESL made it universal all worked and car starts te cluster shows on KM ---- due to VIN and SSID is different than the EIS I setup.

I want to change the SSID and the VIN as below on the dump and write the dump back to the cluster need your help please.

The eeprom chip number is ST95080

10 16 27 D7 SSID
VIN - WDF63971313002374
MB Viano 2003