Vag edc15v

[Rome125]

hello everybody . I have an ecu vag edc15v and kess v2 clone already tried via obd and pinout. I already made a new sd card from samsung for kess and nothing I can't read....
Does anyone know how to read this central?
thank you all

[mkii]

kess v2 don t read edc15v !!!

[Luigi84]

hello everybody . I have an ecu vag edc15v and kess v2 clone already tried via obd and pinout. I already made a new sd card from samsung for kess and nothing I can't read....
Does anyone know how to read this central?
thank you all

you can use fgtech,kt200 or mpps for this ecu

[proel]

Nonsenses. No any tool can r/w ...018 ecu's flash over obd2. only soldering job.

[mkii]

Nonsenses. No any tool can r/w ...018 ecu's flash over obd2. only soldering job.

right !!!........................................

[Luigi84]

Nonsenses. No any tool can r/w ...018 ecu's flash over obd2. only soldering job.

EDC15V there are models with flash memory and it reads and writes from obd, the older versions have two plcc32 and you have to desolder them.
open the ecu and see if it mounts flash or plcc

[Luigi84]

kess v2 don t read edc15v !!!

edc15v with 29f400 reads and writes by obd. edc15v with plcc32 desolders..

[proel]

@Luigi84: Wrong. You mix edc15v and edc15vm+. Even some edc15 with 29f400 (...019) can't be read over obd2.
Show us one example of 038 906 018 XX (edc15v) which can be read over obd2.

[mkii]

i wrote a nonsense!!!

sorry

[proel]

there is no 29f400 in ... ... 018 xx ecu's.

[Luigi84]

there is no 29f400 in ... ... 018 xx ecu's.

publish the edc15v list with 29f800 and the one with plcc32 so it will be useful to new users of the forum.
if a person reads you can't do edc15v with kess he believes that all edc15v can't be done by obd..

[volodin69]

HHH and LLL flashes cannot be read by obd with simple tools. Only write flash as a full flash dump with tools like mpps or kess.
To read plcc H and L files you need to desolder and read, then join the files into a full file. Good luck

[Luigi84]

HHH and LLL flashes cannot be read by obd with simple tools. Only write flash as a full flash dump with tools like mpps or kess.
To read plcc H and L files you need to desolder and read, then join the files into a full file. Good luck

Exactly, many years ago I used these flash memories 29f010 and programmer willem

[Luigi84]

@Luigi84: Wrong. You mix edc15v and edc15vm+. Even some edc15 with 29f400 (...019) can't be read over obd2.
Show us one example of 038 906 018 XX (edc15v) which can be read over obd2.


you're right.. I confused edc15v with edc15vm+.. I haven't seen in person an ecu of this for many years...

[Rome125]

Thank you all for your help. I am very grateful

with mpps can i read the edc15 mentioned in my 1st post?

[elektronik325]

Hi. NO. This ecu you need to disassemble and replace eprom with flash. Read only with an external programmer. This ecu has neither bench nor obd programming capability.

[Luigi84]

Thank you all for your help. I am very grateful

with mpps can i read the edc15 mentioned in my 1st post?


with mpps you can read edc15vm+