GOLF 5 IMMO OFF Please

[constantinexx]

EDC16u34 ECU need Immo OFF please
i read via KTAG two files

[tomo776]

Here is immo off.

BR

[constantinexx]

thanks alot , i will try this one of yours , i made my self an immo of tested on the car but didn't start and the vin number was vanished .
is checksum here necessary >>??

[kiszka]

thanks alot , i will try this one of yours , i made my self an immo of tested on the car but didn't start and the vin number was vanished .
is checksum here necessary >>??
How do you think yourself

[constantinexx]

How do you think yourself
i think yes , after flashing the chasis number is now xxxxxxxxxxxxx how to fix it please.

[kiszka]

i think yes , after flashing the chasis number is now xxxxxxxxxxxxx how to fix it please.
read eeprom and share here

[rafal]

i think yes , after flashing the chasis number is now xxxxxxxxxxxxx how to fix it please.

Next one who asked in first post only off, then in other about change data.
You should make correct question in first place

[Meat-Head]

Cant help you but thought was two bytes in eeprom

was once a utiility to do it

[constantinexx]

read eeprom and share here

here you go please fix it

[rafal]

here you go please fix it
.........................
constantinexx has exceeded their stored private messages quota and cannot accept further messages until they clear some space

[constantinexx]

.........................
constantinexx has exceeded their stored private messages quota and cannot accept further messages until they clear some space

cleared it send me pass please

[constantinexx]

i flashed it , no communication with the ecm now

[rafal]

i flashed it , no communication with the ecm now

not possible..................you did something wrong

[constantinexx]

not possible..................you did something wrong

kess conected and idintified the VIN number again, i was happy
conected it ""ECU"" to the car , wont start
read it out there is no comm with ECM dtc shows.
writing was done 100% correct

[rafal]

kess conected and idintified the VIN number again, i was happy
conected it to the car , wont start
read it out there is no comm with ECM dtc shows

kess and eeprom ?
no no - i give up

[constantinexx]

Ktag hhh soryy
kess and eeprom ?
no no - i give up

[rafal]

Ktag hhh soryy

have a look:
data from file off made by me:
vin: WVWZZZ1KZ8W240853
id: VWXBZ0H0737725
mac: 1AAA994E
cs: DDCA8F61BB9500
pin: 29754
mileage: 287959
CS check: CS1 correct
CS check: CS2 correct
CS check: CS3 correct
CS check: CS4 correct
CS check: CS5 correct
First check: Immo data correct
Next check: VIN data correct
Next check: ImmoID data correct
Next check: MAC data correct
Immo status: off

what do you want more?

[volodin69]

Post ecu sw and hw numbers, need full bdm files to write back and your eep with immo off. I can bet 100% that your flash is corrupted and you have made something wrong there, when reflashing it. Also, immo off can be made by obd, verry easy...
HW 03G906021AB
SW 1037376661
Right?

[rafal]

Post ecu sw and hw numbers, need full bdm files to write back and your eep with immo off. I can bet 100% that your flash is corrupted and you have made something wrong there, when reflashing it. Also, immo off can be made by obd, verry easy...

exatly
i never removing ecu if 16
anyway - i did for him 100% correct

[constantinexx]

exatly
i never removing ecu if 16
anyway - i did for him 100% correct
just relax am not accusing you with something , i will post a full read again
HW:
SW: 1037390160
VIN nr.: WVWZZZ1KZ8W240853
SW ver.:
Spare:
Engine: R4 1,9L EDC
HW Ver.:
SW upg.: 03G906056D 1525
Installation:

[rafal]

just relax am not accusing you with something , i will post a full read again
HW:
SW: 1037390160
VIN nr.: WVWZZZ1KZ8W240853
SW ver.:
Spare:
Engine: R4 1,9L EDC
HW Ver.:
SW upg.: 03G906056D 1525
Installation:

sw 1037390160 like this not exist

[constantinexx]

sw 1037390160 like this not exist


this is the Id From KTAGm can the ECU itself is defect ??any ways thanks alot for youe help again i will try to get another ECU , i will ask you again if i need help :)

[rafal]

this is the Id From KTAGm can the ECU itself is defect ??any ways thanks alot for youe help again i will try to get another ECU , i will ask you again if i need help :)

your sw from eeprom is 1037376661 ;)

[volodin69]

this is the Id From KTAG

ID from your last eep dump posted here...

[constantinexx]

your sw from eeprom is 1037376661 ;)

yep correct , reading from OBD will generate one file right ??

[rafal]

yep correct , reading from OBD will generate one file right ??

why do you want off?
what is hapened when you will write all ori files?

[constantinexx]

why do you want off?
what is hapened when you will write all ori files?

immo problem a DTC says key signal implausible , thats why dtc off
writing tell now is possible via Ktag , but when i connect the ECM the car wont start ,
this is via OBD using KESS online before the ECU communication is gone
:

[volodin69]

I repeat. Write full bdm with ktag, and immo off in eeprom. The car will start. Key signal implausible could occure due to key immo coil ring, or because of dash broke for known issues on this car model. Do as I tell you and start the car.

[constantinexx]

thanks i will let you know thanks alot everyone

[kiszka]

thanks i will let you know thanks alot everyone
https://mega.nz/file/JnB2EAaY

[Meat-Head]

Put original file back. Should start run die. Faulty code start blocks by imooliser