2007 VW EOS TDI EDC16U34 95320 - IMMO OFF

[Karmannm]

Trying to fix an immobiliser active issue for a friend

Its a 2007 VW EOS TDI

03G 906 021 TA ECU with 95320 eeprom

Tried editing the bin file using the '60 trick' but didn't work

Attached is the original file - is anyone able to switch the immobiliser off?

Many thanks

[kiszka]

Trying to fix an immobiliser active issue for a friend

Its a 2007 VW EOS TDI

03G 906 021 TA ECU with 95320 eeprom

Tried editing the bin file using the '60 trick' but didn't work

Attached is the original file - is anyone able to switch the immobiliser off?

Many thanks
https://mega.nz/file/8jgzjTCK

[cristo_844]

immo off.....

[Karmannm]

Thanks both for the fast response, really appreciate it

This worked a treat!!

Now just need to modify the cluster eeprom...

[rafal]

Thanks both for the fast response, really appreciate it

This worked a treat!!

Now just need to modify the cluster eeprom...

good
some info for future work:
1 - 33 - 60 only working with edc15 , in edc16 will never work
....................................
what do you want edit in cluster?
and after stert car - have you p1570 dtc ?

[Karmannm]

The cluster bin file has now been modified to disable the Immobiliser Active message but wondering if I've gone about it in the right way...


Cluster serial number 1Q0 920 974 A
Micronas CDC3217G
Eeprom 24C32


Addresses 0x91000 - 0x92007 have been changed to FF


This has removed the immobiliser message but ESP, Steering and tyre pressure lights are on with engine running


Fault codes:
01435 Brake Pressure Sensor 1 (G201): No or Incorrect Basic Setting / Adaption
01423 Lateral Acceleration Sensor (G200): No or Incorrect Basic Setting / Adaption
00778 Steering Angle Sensor (G85): No or Incorrect Basic Setting / Adaption


Tried adapting ABS module using RossTech guide but gives an error. Steering angle measuring block stays at 0 when turning the wheel.


Not sure if this is a result of the bin file mod or just from having the battery disconnected / swapping the cluster

[lupu_sandu]

ABS :
Login 40168
Basic settings: Brake Pressure Sensor
Done
Ign off/Ign on
Repeat from beginig for every sensor.
Done

[Karmannm]

Persevered with the Basic Settings using security codes 31857 & 40168 and eventually all the lights went out!!

Thanks again for all the help