flatron11
21st March, 2023, 08:31 PM
Dear all,
I'm in a cluster swap in a 2008 Scirocco from a small red display cluster to a premium 3D cluster.
The immo is disabled in the ECU and in the cluster, but the VIN number isn't mach so I can't calibrate and code the ABS.
If I put back the original cluster everything is good, but with the new one I can't calibrate the brake pressure sensor and the other ones... So I need to change the VIN number in the cluster.
In VAG Dash editor there is a table reference where is the VIN number in the eeprom, but if I open the hex with an editor, it isn't the clear VIN in ASCII coding.
950748
It is possible to change the VIN with any hex editor, or I need VVDI to change it?
Thank you,
Best regards, Tomi
I'm in a cluster swap in a 2008 Scirocco from a small red display cluster to a premium 3D cluster.
The immo is disabled in the ECU and in the cluster, but the VIN number isn't mach so I can't calibrate and code the ABS.
If I put back the original cluster everything is good, but with the new one I can't calibrate the brake pressure sensor and the other ones... So I need to change the VIN number in the cluster.
In VAG Dash editor there is a table reference where is the VIN number in the eeprom, but if I open the hex with an editor, it isn't the clear VIN in ASCII coding.
950748
It is possible to change the VIN with any hex editor, or I need VVDI to change it?
Thank you,
Best regards, Tomi