PDA

View Full Version : pcr2.1 egr dpf off


dany81
22nd March, 2023, 08:59 AM
hi i have problem with egr dpf off in audi a3 pcr2.1 ive done file with davinci and after 600 miles dpf showing full .Any one have better solution?THANKS in advance
daro70
22nd March, 2023, 09:59 AM
Probably the DPF is full, do a regeneration or remove
Krisfuzzy
22nd March, 2023, 12:14 PM
hi i have problem with egr dpf off in audi a3 pcr2.1 ive done file with davinci and after 600 miles dpf showing full .Any one have better solution?THANKS in advance
Keep using cracked davinci without a minimum of knowledge and these are the results
donatas91
22nd March, 2023, 04:33 PM
send file i look
volodin69
22nd March, 2023, 04:40 PM
Dis you reset all dpf related parrametters before writting dpf egr off file?
Luigi84
22nd March, 2023, 05:06 PM
hi i have problem with egr dpf off in audi a3 pcr2.1 ive done file with davinci and after 600 miles dpf showing full .Any one have better solution?THANKS in advance


davinci doesn't work for pcr 2.1
Luigi84
22nd March, 2023, 05:07 PM
Keep using cracked davinci without a minimum of knowledge and these are the results

Even the original version has problems with Pcr 2.1
Krisfuzzy
22nd March, 2023, 07:22 PM
Even the original version has problems with Pcr 2.1with a minimum of knowledge you can do it you don't need a software
Luigi84
22nd March, 2023, 08:33 PM
ecu very easy.
dany81
22nd March, 2023, 11:11 PM
Well everybody talk about davinci not working gest let yous no it is working the file is ben ok is ben injector fail.The file is ben on the car over 1 month. My pall phone the other day and tell me dpf light come on i tho the file is ben wrong in the 1st place that i ask for quick help .Hi dont have clues is ben check engine and glow plug light.
duddy
23rd March, 2023, 10:13 AM
You can't do that with this program. davinci has a lot of bugs in many drivers

You can't do that with this program. davinci has a lot of bugs in many driversYou can't do that with this program. davinci has a lot of bugs in many drivers
atalayyildiz
24th March, 2023, 10:01 AM
If you have no winols / ecm titanium experience, I recomend you to use Davinci 10.0.28 version to make them off. Please follow up the below steps before make it again,

1-Load the original file
2-Complete the steps "Regeneration,Differential Pressure Reset, Oil Reset"
3- Use Davinci 10.0.28 to make off DPF and EGR and then save it
4-Open DAvinci 10.0.28 again and select the file which you saved. A message will appear like "DPF already disabled but some DTC still on etc...". Press OK
5-Make DPF off again and then write to the ECU.

It will work 100%