Renault DCU3R kit Ecu-Inmobox MAtched. for All

[sergei5005]

Hello friends. Im have Kit DCU3R from renault kangoo 1.9 DTI. Ecu (95080) - Inmobox (93C46) Matched. Tested OK. Free for All

[sergei5005]

DCU3R kit Tested OK here :)

[elektronik325]

Hi tell me this is a set with a converted immo box for an emulator? Because as usual synchro, you do ecu virgin and it will add itself to the immo box. And you have the ori key. Best regards

[sergei5005]

hello friend. This IS NOT IMMO OFF file. this is one original file read from one car OK. Yo need copy this files in ecu and inmobox. next need make one new transponder key and GO !!!

[volodin69]

Do you have any for Fiat (doblo) dcu3F? I have a junk here and tried all things on it. Especially removing eeprom in ecu.

[sergei5005]

Do you have any for Fiat (doblo) dcu3F? I have a junk here and tried all things on it. Especially removing eeprom in ecu.


Not my friend....Im sorry

[Mr BLACK]

i do not know for dcu3f ...dcu3r is easy to immo off....i just make one ..

[Mr BLACK]

do you try on dcu3f to make wp on 95080

[sergei5005]

i do not know for dcu3f ...dcu3r is easy to immo off....i just make one ..

HI friend. what lines need modify and what data need change for Inmo OFF in DCU3R ??? THanks !!!

[Mr BLACK]

here work tested many times

[Mr BLACK]

orig dump and immo off dump ...eeprom is with flash so is not working to write same dump to other ecu

[Mr BLACK]

and do not forget to write to status reg after write immo off dump....and cut pin/wire 20

[sergei5005]

anybody try change 28F in line 000000 and 28F in line 0000080 in original eprom file and write to status reg for write lock ??? is this one good solution????

[volodin69]

What ecu? Can be done with some pins rised from the pcb and connected to an external switch.

[sergei5005]

#What ecu? Can be done with some pins rised from the pcb and connected to an external switch.#
Talk about DCU3R from kangoo DTI 1.9 my friend !