marezki
30th March, 2023, 01:49 PM
Hello guys,
I was trying to update an E46 320d M47 136hp DDE 3.0.
The car still has the old round 20 PIN connector. So i am using a 20 pin to OBD adapte and K+DCAN Cable with pins 7+8 connected.
I could read errors, clear them, log engine parameters, read the car with ISTA etc, so the cable was working correctly.
Then, I tried to update the ECU using WinKFP and I got the error ' Datatransmission to ECU disturbed IFH-0010 '.
From that moment, the car is not starting anymore, it only cranks. The ecu is only partially responding.
I've attached pictures exports from INPA, ISTA, Tool32 for you.
They are here https://imgur.com/a/LXakKNR
Can this be saved? Thank you very much for all your help.
I was trying to update an E46 320d M47 136hp DDE 3.0.
The car still has the old round 20 PIN connector. So i am using a 20 pin to OBD adapte and K+DCAN Cable with pins 7+8 connected.
I could read errors, clear them, log engine parameters, read the car with ISTA etc, so the cable was working correctly.
Then, I tried to update the ECU using WinKFP and I got the error ' Datatransmission to ECU disturbed IFH-0010 '.
From that moment, the car is not starting anymore, it only cranks. The ecu is only partially responding.
I've attached pictures exports from INPA, ISTA, Tool32 for you.
They are here https://imgur.com/a/LXakKNR
Can this be saved? Thank you very much for all your help.