ganimir
2nd April, 2023, 04:03 AM
Hello to everyone,
I would like to received little help from you guys for the following case
The car is ford focus 1.6tdci i'm struggling to find where the NM limiter is or if it has one.What i found on the diagnostic log is that car can't pull over 200 ft/lb which is around 270nm.. even if i trick the fuel via "Lambda" on the 3thgear i can see plenty of fuel around 70mm3 but in the diagnostic torque is not showing more than 270nm. and on 4th and 5th gear the fuel is limiting back to 57mm3 and 250nm, that's why i'm thinking that there is some limiter missing from my side. i will be very grateful if someone share his opinion.
i will attached my full mappack made by me which can be useful for someone also :)
I would like to received little help from you guys for the following case
The car is ford focus 1.6tdci i'm struggling to find where the NM limiter is or if it has one.What i found on the diagnostic log is that car can't pull over 200 ft/lb which is around 270nm.. even if i trick the fuel via "Lambda" on the 3thgear i can see plenty of fuel around 70mm3 but in the diagnostic torque is not showing more than 270nm. and on 4th and 5th gear the fuel is limiting back to 57mm3 and 250nm, that's why i'm thinking that there is some limiter missing from my side. i will be very grateful if someone share his opinion.
i will attached my full mappack made by me which can be useful for someone also :)