BMW F20 Black Dashboard

[leowii]

How to adapt a used black dashboard in Bmw F20.
I already tried on the 35128 to put FFFF in the VIN and red dot.
I tried to write the correct VIN on the used dash and the red dot remains.
Any idea wow to do it??

[bob191919]

Are you sure its 95128, most have 160D0WT. What about the FEM? post picture of board

[leowii]

yes is the new one, the black, sorry you right, 35128WT.
FEM is done :wink-new:, the problem was the original stop working with the emulator for the 35128.... So I bought a used one. I programmed with Esys and everything works, I just have the red dot ON....

[brend]

yes is the new one, the black, sorry you right, 35128WT.
FEM is done :wink-new:, the problem was the original stop working with the emulator for the 35128.... So I bought a used one. I programmed with Esys and everything works, I just have the red dot ON....

Try drive +/- 50--100 km for correct sunhro .

And I hope you know , this eep have id ?

[leowii]

Try drive +/- 50--100 km for correct sunhro .

And I hope you know , this eep have id ?

No drive arround... aready done a lot km... and yes the eeprom have id but the eeprom is from the dash, the problem is not from there.
Thanks

[bob191919]

The 35128WT can't be done with tools like VVDI. Other eeproms(M35080,M35080-3,M35080-6,M35080V6,M35080VP,D80D0WQ,160D0WQ,35160WT) you can replace with 35160DW and erase id,change km. For 35128WT I heard this tool maybe but not tried. Let me know if you can fix.
http://blog.obdii365.com/2022/08/04/virgin-bmw-cluster-m35128-with-vvdi-cgpro-r270-or-yanhua/
Other "solution" canfilter for bmw G

[leowii]

How to adapt a used black dashboard in Bmw F20.
I already tried on the 35128 to put FFFF in the VIN and red dot.
I tried to write the correct VIN on the used dash and the red dot remains.
Any idea wow to do it??

Back again with this issue.... maybe someone have some light...

The dash have 3 places with the vin, i change only 2, because if i change the 3 place the dash stop working, it was some kind os CRC.
who knows to calculate the CRC?

[bob191919]

I use these for 35128WT: https://www.yanhuaacdp.com/wholesale/yanhua-35xx-emulator-chip.html

[figani]

Back again with this issue.... maybe someone have some light...

The dash have 3 places with the vin, i change only 2, because if i change the 3 place the dash stop working, it was some kind os CRC.
who knows to calculate the CRC?


just upload dump...
than someone can check...
upload ori and mod...

[teerak2uk]

I use these for 35128WT: https://www.yanhuaacdp.com/wholesale/yanhua-35xx-emulator-chip.htmlRubbish I bought 3 none worked so now use cgpro for 35128

[kaziukas1958]

you need org eprom id, register in vvdi cipa, or just change org eprom data, the id will remain

[leowii]

you need org eprom id, register in vvdi cipa, or just change org eprom data, the id will remain

all wrong.... the eeprom have the id... i only need to change the VIN....

[leowii]

Problem solved.... Thank you all

[teerak2uk]

If only needed to change vin it's simple job

[bob191919]

@leowil, you said you only changed VIN. Does that mean you found the 3rd place? What did you change exactly. Would be nice to share,thanks