View Full Version : Ford focus 2 ecu swap
babota
6th April, 2023, 03:26 PM
Hello friends
I have a Ford Focus 2 1.6 tdci 2006 with p1622 error on PCM and car don't start.if I change pcm with another used one I can synchronize it with launch x431 or i have to open dashboard and pcm.I don't have IDS.Thanks
rafal
6th April, 2023, 03:57 PM
read eeprom from ecu and dash - post here and someone will sync for you
kiszka
6th April, 2023, 05:58 PM
Hello friends
I have a Ford Focus 2 1.6 tdci 2006 with p1622 error on PCM and car don't start.if I change pcm with another used one I can synchronize it with launch x431 or i have to open dashboard and pcm.I don't have IDS.Thanks
let me know when you upload files here
babota
10th April, 2023, 02:26 PM
hello i try to read the dash with upa programmer but give me error[device not respond].What i do wrong?
955114955115
Mr BLACK
10th April, 2023, 02:36 PM
on dash is 6 pin connector ......or buy a fishing rod is best tool for you
kiszka
10th April, 2023, 02:39 PM
hello i try to read the dash with upa programmer but give me error[device not respond].What i do wrong?
show the eeprom reading of the ecu, maybe it can be fixed without the need to read the dash
babota
10th April, 2023, 04:35 PM
show the eeprom reading of the ecu, maybe it can be fixed without the need to read the dash
here file read from original ECU.Thanks
electrons
10th April, 2023, 04:55 PM
there is no complet sync code in 3 lines ....
babota
10th April, 2023, 05:41 PM
i managed to read the dashboard.It can be synch with original ecu or i need another ecu?
I managed to read
kiszka
10th April, 2023, 07:41 PM
i managed to read the dashboard.It can be synch with original ecu or i need another ecu?
I managed to read
https://mega.nz/file/tvx1mRDD
babota
11th April, 2023, 03:23 PM
Kiszka thanks,the car didn't start because the ecu was fault, i changed ecu,sync and now car start but i have esp light on and DTC u2202 .
kiszka
11th April, 2023, 06:27 PM
Kiszka thanks,the car didn't start because the ecu was fault, i changed ecu,sync and now car start but i have esp light on and DTC u2202 .
what error did you have on this ecu eeprom
babota
12th April, 2023, 06:37 AM
P1000 and p1395 and 138B
kiszka
12th April, 2023, 08:17 AM
P1000 and p1395 and 138B
P138B Glow Plug Control Module System Voltage
P1395 Glow Plug Monitor Fault On Bank 1 (Right Side)
P1000 OBD II Monitor Testing Not Complete
would you betray the secret of what happened to this car
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.