View Full Version : John Deere Cluster display corrupt?
McDowell
13th April, 2023, 08:07 AM
Hello all,
I am having a problem with the following dash, i already swapped flat and no luck....i even bought a new display and still looking as in the picture, maybe data corrupt? do you have a good 93LC66 info so i can try? I would really appreciate it. Thanks a lot in advance.
AL 159134 - 90154-2500000 SW06.03.03
955694955695955696955697
I attach eeprom
bob1620
13th April, 2023, 08:34 AM
your problem is flexible cable not eeprom
if change lcd problem is loss
finger on cable will be tetter
McDowell
14th April, 2023, 07:21 AM
your problem is flexible cable not eeprom
if change lcd problem is loss
finger on cable will be tetter
I already swapped twice flexible cable...and look exactly the same. and lc came with flexible cable to solder directly....no warm up carbon cable....so there is no loss... i am going crazy....
and LCD type is the good one i am pretty sure.
bob1620
14th April, 2023, 03:49 PM
if you are sure check bin file or use other bin file for test eeprom
McDowell
17th April, 2023, 08:25 AM
if you are sure check bin file or use other bin file for test eeprom
Thanks, thatīs what i am looking for,...i donīt have any dump anyone can help?
So i can discard thats the issue,.
Thanks a lot in advance
Labtech24
13th May, 2023, 11:23 AM
Thanks, thatīs what i am looking for,...i donīt have any dump anyone can help?
So i can discard thats the issue,.
Thanks a lot in advance
problem is eeprom or MCU
if you need help please contact pm
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.