Need PIN from eeprom dump Astra H Z20LER ME7.6.2

[er4o]

Hey guys, I am trying to adapt new ecu for this Astra H (ME7.6.2), I have the car security code but when I try to adapt it from Immobilizer > Proggraming > Immobilizer Programing > Program Immobilizer Function (with entered car pin) nothing happens and I have in ECU error Wrong immo signal received. Do u think I reset the new ecu with its PIN (which I need) it will work?


Attaching the eeprom from the new ecu if someone can get the pin from it would be awesome!


Thank you!

[credoline]

Try pin code 3434

[er4o]

Hey, not working :/

[volodin69]

What tools you have? Any passthru j2534 interface?

[danielif]

Try pin code 3456

[er4o]

I have genuine Tactrix

[Ninjor s]

Hey guys, I am trying to adapt new ecu for this Astra H (ME7.6.2), I have the car security code but when I try to adapt it from Immobilizer > Proggraming > Immobilizer Programing > Program Immobilizer Function (with entered car pin) nothing happens and I have in ECU error Wrong immo signal received. Do u think I reset the new ecu with its PIN (which I need) it will work?


Attaching the eeprom from the new ecu if someone can get the pin from it would be awesome!


Thank you!

Use carprog quick and fast

[volodin69]

Carprog cannot read correct pin on this. Already discussed here on DK.
Tactrix cannot work with the sw i was thinking about for CAN models of me762. Only with MDI and VXdiag

[danielif]

FVDI read the PIN code corectly.

[brend]

Hey guys, I am trying to adapt new ecu for this Astra H (ME7.6.2), I have the car security code but when I try to adapt it from Immobilizer > Proggraming > Immobilizer Programing > Program Immobilizer Function (with entered car pin) nothing happens and I have in ECU error Wrong immo signal received. Do u think I reset the new ecu with its PIN (which I need) it will work?


Attaching the eeprom from the new ecu if someone can get the pin from it would be awesome!


Thank you!

For reset you need pin code from donor ecu .

After reset ecu ..........
For programming immo in ecu use car pin code , that's it .

All this option after wrong set pin code can stop security wait time in ecu or immo , .......... check , for by sure .

My experience.
About read pin code from me7.6.2................
Genuine or well repaired carprog do this job well with this ecu type.
Smok.......
no problem.

[Ninjor s]

Carprog cannot read correct pin on this. Already discussed here on DK.
Tactrix cannot work with the sw i was thinking about for CAN models of me762. Only with MDI and VXdiag

maybe your carprog dont but my one does very well.

[kiszka]

Hey guys, I am trying to adapt new ecu for this Astra H (ME7.6.2), I have the car security code but when I try to adapt it from Immobilizer > Proggraming > Immobilizer Programing > Program Immobilizer Function (with entered car pin) nothing happens and I have in ECU error Wrong immo signal received. Do u think I reset the new ecu with its PIN (which I need) it will work?


Attaching the eeprom from the new ecu if someone can get the pin from it would be awesome!


Thank you!
In my opinion, this is pin 3411

[er4o]

In my opinion, this is pin 3411

Code worked! Reset the ecu with OP-COM and adapted with OP-COM again. Car is running now.

Thank u all!

[lion0304]

In my opinion, this is pin 3411

COuld you give me pin for 2 used ME762, need to adapt Corsa OPC that ECU completly dead.

Thank you

[kiszka]

COuld you give me pin for 2 used ME762, need to adapt Corsa OPC that ECU completly dead.

Thank you
Read eeprom not flash

[lion0304]

Read eeprom not flash

Sorry mate, i read with fvdi and fgtech. All give only flash

What tool can read eeprom please?

[lion0304]

Could you give me pin for these 2 ECU.

Thanks

[kiszka]

Could you give me pin for these 2 ECU.

Thanks
0261201994 5624
0261208985 8143