PDA

View Full Version : dm800 repair or part exchange



shaks08
15th March, 2010, 11:29 AM
my dm800 has been out for past couple of months, all it does is red light keeps flashing constantly and on the lcd it shows 'dream multimedia ->error!'. iv managed to change all sorts of images but all come out with the same result. I know its not the image problem as it was working fine for few weeks but happened when i unplugged from mains and plugged it back in.

is there anyone willing to repair it for me or exchange it with another one, willing to pay for the cost

strzyzol
15th March, 2010, 12:09 PM
Probably the power supply is faulty, try the heat and see if I start.

ghhghgh
15th March, 2010, 04:19 PM
Nice work, Thx for The Informations

dctyper
15th March, 2010, 06:05 PM
ill repair it for you, but try this 1st please

1. dl your image,(i take it its a clone)
Digital Kaos - Downloads - Nabilosat Enigma2 Black Hole - DM800 v0.12 FOR CLO (http://www.digital-kaos.co.uk/forums/downloads/images/2/nabilosat-enigma2-black-hole-dm800-v0-12-clo-983/)

2. then use this to flash the correct bl after you flash the image
Digital Kaos - Downloads - 2nd stage and force flash (http://www.digital-kaos.co.uk/forums/downloads/other/8/2nd-stage-force-flash-997/)

cauliflower69
16th March, 2010, 01:24 AM
dctyper do you know anywhere I can grab a decent tuner for a DM800S?

dctyper
16th March, 2010, 05:15 PM
i bought a genuine one from sms in camberly

Manic01
16th March, 2010, 05:41 PM
dctyper do you know anywhere I can grab a decent tuner for a DM800S?

s upersatshop.eu/products/DM800-HD-%252d-DVB%252dS-Tuner.html

hepi62
27th June, 2010, 11:14 AM
Nem m?kszik

philipgr
27th June, 2010, 11:32 AM
can you put a sat tuner in a dm cable or do have to solder

alunfennell
27th June, 2010, 11:55 AM
If its a clone 800 there is a 50/50 chance an original Dreambox tuner will not work, its just that short cuts are take in some case to get the clone working if there were problems in its production, also different materials are used than that of real dreamboxs thus causing in some cases errors.


To answer your question ! they are plug in and play on your model
http://www.dream-multimedia-tv.de/sites/default/files/products/Tuner_jpg/DVB_S_03_kl.JPG

philipgr
27th June, 2010, 12:43 PM
its a dm500 clone so you can plug and play

southpaw
27th June, 2010, 05:42 PM
Nope , dm500 has a fixed tuner , dm800 has plug+play tuners ,

caribarang
3rd October, 2010, 07:39 AM
Hi,
my new DM800 worked about 1 week.
Suddenly there is no Video and Audio, just black on TV.
After reboot, which comes likely normal, but at the end, still dark on TV and no reactions to Remote.
Does anyone knows, what's happened?

bubbles69
3rd October, 2010, 09:21 PM
if you get lcd dreamboxmultimedia error>

check sim card is not loose common problem, try raising the pins of the sim reader

if still no joy perhaps try a new sim they can be found here..!! http://ukdreamshop.co.uk/product.php?id_product=46

sergej77
20th January, 2011, 07:19 PM
I really hope your answers can help me. I'm going nuts over here since my dm800hd won't boot newly flashed gemini image.

Jo-Jo
20th January, 2011, 08:37 PM
deffo sounds like the sim card has come loose

langest
11th February, 2011, 12:27 PM
nice work. i hope this solve my problem