Help dissabling DTC Hex addess

[danicuendias]

can someone please help me identify these 4 DTCs?, My car is a forfour brabus, same engine and ECU than Mitsubishi colt CZT.
We added a 3 port solenoid and tuned it to have more boost but I goes limp mode and we need to ignore these DTCs.

If you could please help me and disable them or let me know the Hex address and we could do it in winols:

DTC P1233 TPS Main plausibility
DTC P1234 TPS Sub plausibility
DTC P1241 Torque Monitor
DTC P1238 MAF plausibility Torque Monitor

Kind regards.

[yamomoto]

Hi.
Your problem is often solved not by a software method, but by a mechanical one.
I'll try to explain.
If on Mitsubishi when replacing (swap) a 2.0l engine, for example, on a 2.4l intake manifold plastic (resonance chambers)
and MAF-sensor body leave from 2.0 engine, then you get P1241 and then P1238.
Errors P1233 and P1234 are not main ones, but only a consequence of violation.
For limp mode.
Errors P1241 and P1238 can be eliminated, it is enough to install an "plastic inlet" from a 2.4l engine.
Think about your case.

P.S. Although, in principle, it can be solved programmatically.

[danicuendias]

Thank for the reply, I would like to disable this torque monitoring in the ECU.
Hopefully someone could tell me which Hex address I need to modify to disable them.

P1233, 1234, 1235 took place anytime when we use outside tuning valves.
P1238 and 1241 took place anytime when we use more then stock boost levels or more then stock turbos. If you don't want to disable 1238 and 1241 you need modify air-flow and torque-limiter tables, but it really difficult problem.

[yamomoto]

If relevant, check.
Attach.
Pass PM.
BR

[danicuendias]

I gave you the wrong codes, It didnt work but know I got the right DTCs to disable, I just post it, if you could check It, thanks
https://www.digital-kaos.co.uk/forums/showthread.php/1022469-Mitsubishi-colt-czt-forfour-brabus-Disable-DTCs?highlight=forfour+brabus

[yamomoto]

What do wrong error codes mean ?
960883



Can someone please help me disabling these dtcs?
DTCs P1970, P1966, P1961, P1962, P1963,P0222,P0223

See below for these error codes...

960884

Software update only.
Recircular Mitsubishi Motor dated December 2006.

Or fix it yourself in this program -
最大スロットル位置初期化時間 -
"maximum throttle position initialization time".