TOYOTA HIACE QANTUM 2TR IMMO OFF AND CUT WIRE

[ebbie01]

Hi guys, IM in neeed for immo off for the Toyota 2TR Qantum attached is 93c56 orig file
Please help and also which wire to cut on ecu....

Rep and thanks I will surely add :smile:

Thanks to all master DK

[LEORNARD NKATA]

Hi guys, IM in neeed for immo off for the Toyota 2TR Qantum attached is 93c56 orig file
Please help and also which wire to cut on ecu....

Rep and thanks I will surely add :smile:

Thanks to all master DK

try this and give report dont cut any wire on ecu maybe you can remove the immo box but on my car it works with no wire cut and with immo in the car

dont forget thanks & rep

[ALBERTO_]

try this and give report dont cut any wire on ecu maybe you can remove the immo box but on my car it works with no wire cut and with immo in the car

dont forget thanks & rep

Hi, I just tried your file on a 2013 Hiace with the same engine, and "G" key, but it didn't work.


I have the dtc's
B279A and B279C

[LEORNARD NKATA]

Hi, I just tried your file on a 2013 Hiace with the same engine, and "G" key, but it didn't work.


I have the dtc's
B279A and B279C

will read the file on my working ecu and share 2moro morning

[LEORNARD NKATA]

Hi, I just tried your file on a 2013 Hiace with the same engine, and "G" key, but it didn't work.


I have the dtc's
B279A and B279C

also try to use a different eeprom or use a blank new eeprom i also faced the same problem until i wrote the same data on a different eeprom in my case i used an st eeprom SP08 and the car started with no problems

[ALBERTO_]

Ok I'm burning a new eprom

[ALBERTO_]

also try to use a different eeprom or use a blank new eeprom i also faced the same problem until i wrote the same data on a different eeprom in my case i used an st eeprom SP08 and the car started with no problems

No't work ��

[ebbie01]

Thank you DK, I will test now and report. THis 2tr quntum is chip is 4d67 type not G.....

will report

[LEORNARD NKATA]

No't work 🥲

try use original file for the ecu and edit only the first line and put 2112 2112 2112 and remove immo box am very sure it works cause am actually driving the car that i started this way and if you check my old posts you will find files that i shared and they worked for the same ecu.

[ALBERTO_]

try use original file for the ecu and edit only the first line and put 2112 2112 2112 and remove immo box am very sure it works cause am actually driving the car that i started this way and if you check my old posts you will find files that i shared and they worked for the same ecu.


Thanks friend LEORNARD, unfortunately it did not work, I have used what you mentioned before with success, maybe there is another problem