PDA

View Full Version : Audi TT year 2004 Dump error



billigkid
16th March, 2010, 08:44 AM
Hello,Members

I have a problem after programming Audi tt Year 2004 the Key symbol keeps blinking all the time but the car starts and is able to drive but key light keeps on blinking.The rest of the dash works fine no other errors.Could anyone bee so kind and have a look at the dump.i have been studying it for a loong time now to me it seems that at the end of the dump is is ff00 00ff i compared with two others and there i only find allways ffff 00ff.
please help me to solve this problem.

how do i post the dump??

billigkid
16th March, 2010, 08:59 AM
Hello,Members

I have a problem after programming Audi tt Year 2004 the Key symbol keeps blinking all the time but the car starts and is able to drive but key light keeps on blinking.The rest of the dash works fine no other errors.Could anyone bee so kind and have a look at the dump.i have been studying it for a loong time now to me it seems that at the end of the dump is is ff00 00ff i compared with two others and there i only find allways ffff 00ff.
please help me to solve this problem.

how do i post the dump??

umoussa
16th March, 2010, 10:31 AM
What is the ECU type?

Siemens Simos or Bosch?

billigkid
16th March, 2010, 11:29 AM
What is the ECU type?

Siemens Simos or Bosch?


Sorry really dont know have to check on this
what i know is that it is a magneti marelli Dash.

drpeter
23rd March, 2010, 12:10 PM
Sorry really dont know have to check on this
what i know is that it is a magneti marelli Dash.

Hi,

I looked at your dump and I am missing some values on adress 445 and 446, I changed it for you. Try this one and post result. Original km is 88791.
( I saved as e2p, you are using diga for this right?)

billigkid
24th March, 2010, 08:31 AM
Wow you are great
Asked my friend says yes this is old value
he will show up on monday to reprogram dash .
will give you feedback rightaway.

Until then best regards and you rock !!!!

billigkid
1st April, 2010, 05:10 PM
Hello, Drpeter just programmed you file but still no change car still behalfes like before startes yes and runs but Keysymbol is still blinking.any other solution??

drpeter
1st April, 2010, 05:17 PM
Hello, Drpeter just programmed you file but still no change car still behalfes like before startes yes and runs but Keysymbol is still blinking.any other solution??

Try to clear errors with vagcom or VCDS.

umoussa
1st April, 2010, 05:31 PM
Try to clear errors with vagcom or VCDS.

Ain't strange that the Car starts but the Immo is blinking??

I think there is something wrong in dash, maybe in the Flash not in the EEPROM

What do you think?

fokker2003
5th April, 2010, 03:08 PM
Some cars blinks inmo light in dash before getting off inmo in ECU, if this is your problem, you must lift 1 leg of SMD led.

billigkid
6th April, 2010, 07:48 AM
Well does any one have a solution to this Problem ??

In Dash Vcds Says Number of Keys = 0
but when i trie to programm them software stops.
Original Audi Dealer Computer says Dash is set on condition 2 what is this??

drpeter
6th April, 2010, 12:36 PM
Well does any one have a solution to this Problem ??

In Dash Vcds Says Number of Keys = 0
but when i trie to programm them software stops.
Original Audi Dealer Computer says Dash is set on condition 2 what is this??

Desolder/remove the SMD led under the key problem solved.