Can't Peugeot bipper does not start

[fuzz1]

Hello

I have a problem with a Peugeot Bipper 2016 Diesel 1.4 HDI.

The car doesn't start anymore. To start it, you have to remove the power supply from the BSI, leave it for 5 to 10 minutes for it to restart. I think we need to change the BSI but unfortunately it's not easy to find one where I am.

Does someone have an idea?

U1700 faults 87No communication with BSI ECU

P1351pre/post heating relay relay supplied and plugs never supplied

u0426 31 fault incorrect immobilizer code sent by engine ecu (intermittent)

u1118 (intermittent) com fault on the can - no com with bsi
The bsi number 01384173080

111R1-000674 delphi

Thank you in advance

[Stelaras26]

hmm,first you need to check if immo is the problem or just comms with bsi.I would check if it gets into diagnostics when the car does not want to start,to see if it communicates.
Also when it does not want to start,bsi works for other functions?Like windows ,flash,alarm,horn,wipers,central locking etc

then via diagnostic data to see if ecu is ecu gets the ok to start car.

if not,please upload ecu numbers,you could do immo off to see if it starts ok,just to check

you may have seen these but ,here in the txt with a fast search i found two used bsi same numbers

[aceton]

In cars after 2005 make full scan, not only ECU and BSI.
PSA group comunication BSI - ABS - ECU. If You have problem with ABS ( after crash, water ) You have problem with immo.

[fuzz1]

Hi
Thank you for your help. I'll have a look again
Yep there are lots of faults on the car. I just listed the permanent faults but there are lots of others

The car has not been in an accident

[fuzz1]

960281
960282

960283
960282

[aceton]

error in BSI and ABS ?
How it happends ? Flat battery ?
Check ECU suply

[fuzz1]

Hi
Yes error in bsi abs ecu airbag

The car is starting fine since a few days now. But i think those faults will come back. The wiring looks in good condition. Voltage ok. Communication with bsi now possible when the car starts.

The problem started at random. No accident no flat battery

[aceton]

Water in car ?
Spring in ABS plug ?
Clear errors in all ecus.
When problems occur post all errors from all ecus.

[fuzz1]

Hi
No water no flooding no Aircon leaking either.
Hmmm i don't know about the spring in the abs haven't checked it. The Abs wasn't touched. These PSA cars has a few issues with wiring creating intermittent faults.

I will scan the car when it stops working again to see what comes up
Thanks

[aceton]

spring > something green on wires or connectors