PDA

View Full Version : HILUX KDN1 2KD-FTV immo off



uanvar
16th March, 2010, 08:45 PM
Hi everyone!
I need immo off for :
Name:Toyota HILUX
Model:KDN1
Year :01/2002
Engine: 2KD-FTV
ECU part number:89666-35280 DENSO
Imported from UK

Immo:TOYOTA 89780-35070

Immo faulty needs dump immo off!

Here is ECU dump an original 93с56.

uanvar
16th March, 2010, 09:09 PM
photo me ECU

pecirepi
23rd June, 2010, 06:36 AM
I need this ecu if someone have it used in working condition.
Thank you

automatemad
23rd June, 2010, 07:10 AM
Hi everyone!
I need immo off for :
Name:Toyota HILUX
Model:KDN1
Year :01/2002
Engine: 2KD-FTV
ECU part number:89666-35280 DENSO
Imported from UK

Immo:TOYOTA 89780-35070

Immo faulty needs dump immo off!

Here is ECU dump an original 93с56.

is key lost ?can help you program

pecirepi
23rd June, 2010, 07:12 AM
thank you but it is water problem car was in water with fully charged battery so only peaces left from ecu.

innovateq
7th October, 2010, 02:46 PM
Hi uanvar,

Do you have the manual of the 2KD-FTV engine?
Regards!

robbieakk
7th October, 2010, 02:57 PM
you can use any ecu but still have to program it or you change all ecu ignition and key with key reader

ngakson2002
9th October, 2010, 09:09 PM
hello,
the ECU dump sent contents the synchro data for the IMMO box.
This said, look for any used ECU and proceed by swapping.That means in the used ECU bought, transfer the damage ECU synchro data in this used working one and you may have 90% chance that the car start

Best regards

JIMMYQ
7th November, 2010, 09:53 AM
i got a call from someone with a toyota hilux 2001 NO KEYS is the chip to be read in the ecu or immobiliser box on these? i will be going to the car today never done a hilux before but i presume it will be in the ecu like most other toyota's ?

JIMMYQ
8th November, 2010, 01:18 PM
got same ecu as above which chip do i need to read please to make a transponder key also i cant find immobiliser unit on this 2001 d4d model does it have one if so where?

felix17popa
8th November, 2010, 03:08 PM
look on central console, behind the ash tray, you have to remove few plastic pannels to reach there, is a blue immo box if I remember corectly...good luck

JIMMYQ
8th November, 2010, 05:14 PM
thanks guys much appreciated finally found the damn thing behind the centre console :) what chip do i need to read out of it to make 2 keys?

segs
9th November, 2010, 08:05 PM
93lc66 read and program keys

if blue box 4c chip
if black bok 4d chip

automatemad
10th November, 2010, 03:50 AM
93lc66 read and program keys

if blue box 4c chip
if black bok 4d chip

working dumps

iD4D - 60 - JMA TP xx
Password: 52 - Locked
Identifier: 95 - Locked
Serial number: 63D6C904 - Locked
Secret key: Locked
JMA TPX2

JIMMYQ
10th November, 2010, 03:18 PM
hi ive read the chip it was a blue box i have attatched the bin file and also programmed two electronic head 4c chips which programmed sucessfully through zedbull i used these 8 bytes

0A E3 D9 32 key1

F9 CD 0C 70 Key2


but car still not starting

JIMMYQ
10th November, 2010, 05:35 PM
any ideas on this guys ?
need to give the car back to the customer :(

felix17popa
10th November, 2010, 06:00 PM
did you checked the transponder antenna coil and the amplifier following the antenna wiring? I had a similar problem and in final it proved to be the amplifier ( a small metallic cube, where the wires from antenna goes) and after replacing the antenna and the above mentioned amplifier, everything went ok. Best of luck!

JIMMYQ
10th November, 2010, 06:14 PM
i checked the coil with the ad35 coil tester and it bleeps so i presume it should be working ?

ngakson2002
11th November, 2010, 10:29 PM
Dear Jimmyq,
Your dump belongs to 4D -67 toyota transponder chip.The ones you have program in are from 4C transponder, reasons why it can't start.
I could try to help you by editing the key logic in your dump.This said, accurately read data from a 4D - 67 transponder and post here, i will try to help you.

Regards

JIMMYQ
11th November, 2010, 10:45 PM
Dear Jimmyq,
Your dump belongs to 4D -67 toyota transponder chip.The ones you have program in are from 4C transponder, reasons why it can't start.
I could try to help you by editing the key logic in your dump.This said, accurately read data from a 4D - 67 transponder and post here, i will try to help you.

Regards
thanks mate i dont know whats going on but everyone has different opinions not saying your wrong at all but ive been told its a 4c then 4d60 now 4d-67 which it may well be as my friends hilux is 4d-76 so we can try this tell me what you need :)

the story also continues here too
http://www.digital-kaos.co.uk/forums/f178/reading-dumps-calculators-pin-key-codes-162201/index6.html#post843309

ngakson2002
12th November, 2010, 05:35 AM
Hello,
Just read key Logic or data from a 4D-67 transponder chip and post here along with the immobilizer dump you earlier read.That is all what i need to try if i can help you
Regards

segs
12th November, 2010, 09:29 PM
blue box is 4c chip
do you have orignal key from van . see on the blade if it has a dot if no dot 4c key .
if dot 4d key

ngakson2002
13th November, 2010, 06:44 AM
Dear Jymmyq
From your two immo dumps read in both 8 and 16 byte mode post in this forum,there is no dought and i hereby confirm 200% that your dump is for 4D - 67 transponder chip.
Fitting the immobox of the Hiace will not solve the problem because immo dump in the 93lc66 of the memory device belongs to a 4C transponder chip.

Furthermore, it was wise from you reading the dump in both 8 and 16 bit mode.However, i confirm reading in 16 bit which is exactly the structure your dump should have.
This explain, do not worry, as i ask you yesterday, just send me data from a 4D - 67 transponder chip and in less than 1 hour you will have your car back on the road.
You can even sent it directly to my email ngakson2002@yahoo.com

Regards

ssemmedo
27th April, 2012, 08:12 AM
i have the same problem with a toyota hilux KDN 2002. i need to make the car start. i have the dump from immobilizer readed as 93cl66 and 93cl66_16bit. i still don?t have yet any information of the keys, but i?ll read it and post the result here.
My question is: there is no mean to make immo off for this ecu??

ssemmedo
29th April, 2012, 02:34 PM
i have read the keys with zedbull clone and i found the fallowing
key1
data: 92 6F 19FF5A03
RESP: EA5F63 28AB39
INFO: DST LLLL
TYPE:4D 67 CRYPTO WR

Key2
data: 32 6F 19FEBA03
RESP: B6CBF8 A05849
INFO: DST LLLL
TYPE:4D 67 CRYPTO
Can anyone help me to make immo of or rearange the eeprom with those key data.
Thanks in advance

bram380
30th April, 2012, 11:32 AM
Here new dump with two keys.
Hilux 2012-04-30 (https://www.rapidshare.com/files/2067948875/Hilux_2002_new_2012-04-30.rar)

ssemmedo
30th April, 2012, 03:51 PM
Hello sir. i apretiate you answer but i need password to open the file.

bram380
30th April, 2012, 03:56 PM
password attached.
double clik rar file, password will appear.

ssemmedo
4th May, 2012, 10:00 PM
the car did not start, so i decide to try making immo off for this ECU. i will attach the file from 93c56 readed from the ecu.

elmaalouf
7th May, 2012, 11:43 PM
hello friend did u solved ur problem?

ssemmedo
5th July, 2012, 10:01 AM
no i didn?t and i need to make immo off for this ecu
but no sucess