In*o off Ducato 2.0 JTD

[GolfmkI]

I want to In*o off This ecu of Fiat Ducato 2.0 JTD year 2003

0 281 010 346

29f400????
Can i read Flash without desolder??? Galletto ( I have) Peugeto planet system, Lexia or similar..........

I have never desolder an 29f400..........so it will be great, if it is not neccesary......


Very thanks.

[Meat-Head]

whoa hang on there must be at least 3 threads now on the same topic, have a mooch round here, myself sl4k and busaman have been posting, so have a search, dude.

May be admin could do some cutting and butting on here!

Thanks

[GolfmkI]

whoa hang on there must be at least 3 threads now on the same topic, have a mooch round here, myself sl4k and busaman have been posting, so have a search, dude.

May be admin could do some cutting and butting on here!

Thanks
Sorry but have read all the post similars, and there is no one with my same ecu.......ones says only in 29f400 others says it is in a eeprom, other says in both...........So I am in doubt, this is why I question about it...Nobody talks about reading flash with galleto to this job.......


But if you consider, I will delete this post.

Thanks.

[Meat-Head]

right not in mood right now but

a) Busaman spend one week buggering with one of these things
he said he put a socket on the board and decided it's in the flash

b) Yes (must remember to say something) the one M-H-M was sussposded to do was done by some other company not from Meat-Headshire and they
said it WAS in the flash. Heard in the grapevine that there is a permant fault code of U1600 and they ended up placing a bit of tape in the led of the MIL
(naughy naughty)

[GolfmkI]

right not in mood right now but

a) Busaman spend one week buggering with one of these things
he said he put a socket on the board and decided it's in the flash

b) Yes (must remember to say something) the one M-H-M was sussposded to do was done by some other company not from Meat-Headshire and they
said it WAS in the flash. Heard in the grapevine that there is a permant fault code of U1600 and they ended up placing a bit of tape in the led of the MIL
(naughy naughty)

Very thanks for your help I will try to read again all related posts. As you said, seems to need only modify 29f400??

I will answer if I have more doubts.

[GolfmkI]

After reading several post about it, I am going to read 24f900 via OBD with galletto. Can I?
I mean if I can read directly with OBD . If I am not wrong my ecu it is a EDC15C7. When I read dump I will post it.

Some ecus cannot been read by this way, can I read and write 29f400 for this purpose???

I do this because at the moment the only programmer I have X-prog M is come back to factory, I had several problems with it, so I have no more option at the moment.

Thank you.

[GolfmkI]

This is dump of 29f400 I dont Know if it is ok, I have read several times, always same result so supose it is ok, I have read With galletto interface without problems....Anyone help me to in*o off???

Once have write again the new dump in ecu.must I cut any wire or it is not neccesary???

[lupu_sandu]

I never use galletto to read flash for kill im*o.
I read with Wellon, but anyway try this file and post results.
PS: Method is tested by me over 10 Fiat cars.
Work every time :)

[GolfmkI]

I never use galletto to read flash for kill im*o.
I read with Wellon, but anyway try this file and post results.
PS: Method is tested by me over 10 Fiat cars.
Work every time :)

I use galletto because I have not programmer at he moment, both are in factory one for update and other because is a ****ing clone.....

I will try and say you, supose there not any problem, in thery galletto could read and write this 29f400 of this ecu without problem, but you Know.

Should I cut any wire, or sympli disconnect forever any inmo module???

very thanks

[lupu_sandu]

Remove crapy immobox. Forever :D

[teerak2uk]

I use galletto because I have not programmer at he moment, both are in factory one for update and other because is a ****ing clone.....

I will try and say you, supose there not any problem, in thery galletto could read and write this 29f400 of this ecu without problem, but you Know.

Should I cut any wire, or sympli disconnect forever any inmo module???

very thanks
How did you get on with this matey

[teerak2uk]

will this work on a 2.3 JTD

[adam28]

How did you get on with this matey

It would be nice if people updated there threads to help others... Some people get the solution and thats it.

[teerak2uk]

Hi Adam

i know tell me about it

[busaman]

im pretty sure it will be like the pug i did so it will need a vigin flash file and a modified eprom then have to be configured to the car.

and yes it would be nice (polite) for people to post the outcome good or bad but i guess some people just want the answer and never come back.

[maucontacto]

I never use galletto to read flash for kill im*o.
I read with Wellon, but anyway try this file and post results.
PS: Method is tested by me over 10 Fiat cars.
Work every time :)

Hi!!

What you do to the engine light?
(Is always on)

BR

[lupu_sandu]

yeap, is ON, but egine works :D