PDA

View Full Version : Discovery II key issue when using Nanocomm



Buddy41
15th May, 2023, 06:24 PM
Hi,

Ive added many "USED" purchased keys to Discovery II with no problem at all.

I have this Discovery II 2003 which will not show DETECT when adding key at the last stage.
I have about 20 used pcb & have selected 4 from this pile of 20
NONE will show the Detect message.

I delete an old number in say slot 2.
I then add the new pcb number & select OK.
I am then able to set & sync it no problem & see the Successfull message.

Next step is to Detect the key.
Current state on Nanocom shows NOT DETECTED but once you press the key button it should then sat DETECTED in the chosen slot, but this never happens.

Anybody had this issue before ?

I have contect Nanocom in Cyprus who have told me that Rover 75 & Mini pcb will not work on Discovery II vehicles.
I sell many of these on Ebay & have also just picked a pcb out of my stock not knowing whether its a Rover 75, Mini or Disco II pcb so i would think NJanocom support is wrong with this.
Do you agree ?

Rover 75 & Mini can be used & programmed in Discovery II vehicles.

Many Thanks