MB C200 2.2CDI (W203) 2004 question about EIS

[Anzelmas]

Hi, m8s!
I have this Lego in my garage and must start it. Somebody changed EIS, ESL and key. Unfortunately they haven't payed attention that the car is 2,2CDi Manual and they put EIS from MB CLK320 Automat.
EPC says that EIS number for my car must be A2095450608. EIS which is in the car now has number A2095450908.
My question is: must I buy the EIS with number A2095450608 or is it possible to reflash the one which is in the car now?
If it is possible to reflash, can somebody help with the right dumps (flash and EEPROM)?


The car is:


MB C200 2,2CDi (W203) 2004 Manual
Engine OM646.963


Thanks in advance!

[Anzelmas]

Nobody can help?

[rafalgt]

What problem do You have? Can You rotate the key in EIS? ESL is unlocked when put the key in EIS?
Engin is crunking? What with drive authorisation in live data in ECU?

[Anzelmas]

Problem is that EIS, ESL and key are from petrol car. The original car is diesel. I can turn the key, ESL unlocks, ignition is on, but starter doesn't turn.
I want to change VIN and reflash EIS with diesel file.

[Starling_vit]

use StarDiag for change data in EZS (engine, transmission) and prog (x-prog, vvdi, ect) for change FIN. Then renew ECU and use StarDiag

[rafalgt]

It does not mather if it is from diesel or petrol. ECU has to be adapted to DAS. Check driving authorization data in ECU. If is not ok, then virgin ECU and adapt.

[Anzelmas]

Is it possible to change VIN in dump of EIS?
If yes, can somebody change it?
Now VIN is: WDBTJ65JX4F100008
I need: WDB2030071A634991

[rafalgt]

New VIN
But it does not help in start engine...

km is 272691

[LEORNARD NKATA]

[QUOTE=Anzelmas;4557695]Hi, m8s!
I have this Lego in my garage and must start it. Somebody changed EIS, ESL and key. Unfortunately they haven't payed attention that the car is 2,2CDi Manual and they put EIS from MB CLK320 Automat.
EPC says that EIS number for my car must be A2095450608. EIS which is in the car now has number A2095450908.
My question is: must I buy the EIS with number A2095450608 or is it possible to reflash the one which is in the car now?
If it is possible to reflash, can somebody help with the right dumps (flash and EEPROM)?


The car is:


MB C200 2,2CDi (W203) 2004 Manual

i had a situation where a customer brought a w203 c220 cdi with only ecu and no eis esl and key. what i did was i took eis, esl and key from w203 c240 petrol and made the cdi ecu virgin and the car started perfectly before i even did drive authorization.
Engine OM646.963

[MotoVlad]

If there are difficulties in adapting the ECU to the DAS, it is possible to use a Julie emulator to start the motor

[Anzelmas]

I changed VIN (thanks to rafalgt). I expected to connect online to Mercedes and do all SCN codings, teach-in ECU and so on. Unfortunately XENTRY online has only five newer models for W203 and doesn't accept VIN. Looks like my car is too old for online diagnose.
My XENTRY clone doesn't have option to teach-in ECU manually. It wants to connect online for SCN coding at once.
How can I teach-in the ECU?
What version of XENTRY clone still has the Teach-in manually option?

[rafalgt]

You need virgin ECU.
What ecu do You have? Is it renewed?