VW Fox Marelli akl

[rob h]

Hello guys,

VW Fox 5Z0920820P 0013 MC9S12H256 Mask:2K78X ( tausteil, replacement part )
After adding a new id48 by obd.
01177 ecm upper limit exceeded.
01179 incorrect key programming.


Same, when i try reprogram the id48 i added to dump with Tango.


Car has death battery, this might have damaged the dash data.


Ecu and dash are both Marelli.

967237
967238

Does anyone have a full dump, eeprom and flash?

[kiszka]

Hello guys,

VW Fox 5Z0920820P 0013 MC9S12H256 Mask:2K78X ( tausteil, replacement part )
After adding a new id48 by obd.
01177 ecm upper limit exceeded.
01179 incorrect key programming.


Same, when i try reprogram the id48 i added to dump with Tango.


Car has death battery, this might have damaged the dash data.


Ecu and dash are both Marelli.

967237
967238

Does anyone have a full dump, eeprom and flash?
pin 1767 program your keys

[rob h]

I did,

Tango gave me that pin.

Like i wrote , it failed.
The programming, appears succesfull,
Until i put key in, and give ingition on.
Key light blinks, and does not turn off.

So i suspect the dash itself,
That is why, i asked for full dump.

[kiszka]

I did,

Tango gave me that pin.

Like i wrote , it failed.
The programming, appears succesfull,
Until i put key in, and give ingition on.
Key light blinks, and does not turn off.

So i suspect the dash itself,
That is why, i asked for full dump.
what other errors do you have in the meter besides these errors
because in my opinion it is a transponder problem
possibly use vcds

[rob h]

967295

I used oem Avdi,
Never had any problems, with this.
I do have oem vcds.

I just check the flash, compared to other, exact the same. So that is fine.

[rob h]

Resolved, i used another eeprom dash file. (same flash)
Added 2 transponders with tango, and adapted the ecu.

Car had been stored, and the cars battery drain whas likely the cause, of bad eeprom data.

Thank you